Upper mechanics support

Reference: 64/69

Washer for crankshaft screw

 Content of the package1 piece

Reference: 722/49

Tube drive adapter for shaft 8 mm

Content of the package: 1 piece

Reference: 44/7

Freewheel hub 10 mm driven tail

Freewheel hub, 10 mm diameter freewheel

Reference: 94/12

Bush 5 x 6 x 14 mm

Pack of 2

Reference: 36/8

Freewheel hub incl. 2 freewheels

Aluminium freewheel hub incl. 2 one-way bearings 10 mm diameter.

Reference: 54/9

Clamp ring 10 mm diameter rotor shaft

Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted. The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.Clamp ring for rotor shaft, 10 mm diameter

Reference: 770/53

Dome fittings set BK 117 and Bell 430

Not available

Reference: 53/8

plate for swashplate guide

aluminum

Reference: 94/7

Bush 5 x 6 x 13.6 mm

Not available

Reference: 15/7

Eje intermedio

Reference: 57 C

Bush 3 x 4 x 12.1 mm

Pack of 2

Reference: 44/5

Bush for driven tail rotor

Bush, hardened.

Reference: 61/20

Bellcrank set 60 degree

The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...

Reference: 78 A

Bush 3.1 x 4 x 6.4 mm

Pack of 2

Reference: 908/68

Center hub for fan, Notar

Component part for mechanics Ord.No. 1002/27

Reference: 107/43

Balls chrome-plated 2.5 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.