Power meter / LiPo Balancer

Reference: 808/14

Battery holder

This strong battery holder accommodates the battery packs to the side of the mechanics. They are securely held and easily accessible.  Battery holderpack of 4, with O-ring

Reference: 1414

Battery Switch

Dual power supply with gas cap switch

Reference: 808/15

O-ring for battery holder

 Content of the package6 pieces

Reference: 10/7

Apagado 4.8 V.

Reference: 755/26

Foam rubber sleeve

Batteries, receiver etc. are very safe in the front structure if they are packed in a foam sleeve.Many hard landings will cause no damage. The same applies to your electronic units provided that they are cossetted in a shock-absorbing foam sleeve.You just cut off the length you require.Inner diameter: 35 mmFoam rubber sleeve, approx. 250 mm

Reference: 1413

Electronic switch harness

Not available

Reference: 3053

Extern adaptor for separate battery

A separate power supply for a particular servo can be quite a good idea. For this purpose you put an external adaptor between the servo and the receiver. You can then attach a separate battery for power supply to the servo.