Support de tirants - 25mm

Riferimento: 810/5

Kufenauflage

Riferimento: 800/22

Coda skid nera

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Riferimento: 107/26

Set uniball angolati e barrette

Chassis brace set for X-Treme31-part

Riferimento: 830/10

Streben für Benzin-Trainer

Riferimento: 860/10

Streben-Set, CFK

Riferimento: 310/8

Supporto per tubi sintonizzato in 2 parti

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Riferimento: 870/105

Toothed belt, pitch T5/340

Toothed belt, pitch 5for X-Treme trainer helicoptersWhen replacing a toothed belt please note that different toothed belts are used in X-Treme mechanics and X-Treme trainer helicopters.

Riferimento: 890/5

Kufenauflage

Riferimento: 800/23

Morsetto per stabilizzatore orizzontale 800/25

Component part for stabiliser set, Ord.No. 800/25

Riferimento: 830/6

RC-Vorbau

Riferimento: 800/55

Set stabilizzatore, fibra di carbonio

Stabiliser set laminated of carbon2-part - extra lightweight!For installation at all trainers when the stabiliser holder Ord.No. 870/17 is present.250 mm high19.5 g total weight

Riferimento: 800/25

Stabilizzatore grande

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Riferimento: 870/8

Winkel für Kreisel

Riferimento: 722/39

Supporto per il motore

Support for motor

Riferimento: 809/24

Kühlluftschacht Skyfox, rauchglas

Riferimento: 802/50

Verbreiterungs-Set