Roue libre X-Treme, 10 mm

Référence: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Référence: 67/42

Adaptateur de démarrage M8

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 8 mm crankshaft threade.g. at Rossi engines

Référence: 67/16

Bague en silicone pour adaptateur

Silicone ring for starter system Ord.No. 67/13 pack of 1

Référence: 115/15

Flexible 12 x 170 mm

 Content of the package1 piece

Référence: 871/45

Kit entretoises X-Treme

 Content of the package1 x 4,0 mm4 x 16,8 mm4 x 30,2 mm4 x 31,2 mm

Référence: 870/48

Alu-Lagerplatte

Référence: 1065/1

Kurbelwellenmutter 5/16"Ord.No. 1065/1

Référence: 64/39

Cordon silicone

Silicone cableapprox. 1.5 msuitable for any starter and can also be used as a battery charger lead for electric flight.

Référence: 7/69

Anlaßverlängerung mit 4-Kant

Référence: 64/52

Tige embout 6-pans seule, 150 mm

Component part for the starter extension; see Ord.No. 64/46 resp. 64/50.

Référence: 7/68

Startadapter, GFK

Référence: 115/5

Tube PTFE 20 x 2,5 x 120 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Référence: 870/39

Freilauf X-Treme, mitdrehender Heckrotor

Référence: 116/17

Kit raccordement flexible

  Content of the package complete as shown

Référence: 28/15

Cordon de bougie monté 1,5 m

Glow plug cable, approx. 1.5 m, assembled

Référence: 1024/25

O-Ring 18 mm für VergaserhalsOrd.No. 1024/25