Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

bell pinion gear 20-tooth

64/43
Note 
Clutch bell pinion gear
  • 20-tooth
  • module 1
  • material: aluminium
  • twin ballraced
  • incl. clutch lining
  • fits the glow plug motor clutch
86,90 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description
Clutch bell pinion gear
  • 20-tooth
  • module 1
  • material: aluminium
  • twin ballraced
  • incl. clutch lining
  • fits the glow plug motor clutch
Détails du produit
64/43
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

bell pinion gear 20-tooth

bell pinion gear 20-tooth

Clutch bell pinion gear
  • 20-tooth
  • module 1
  • material: aluminium
  • twin ballraced
  • incl. clutch lining
  • fits the glow plug motor clutch
Donnez votre avis
16 altri prodotti della stessa categoria:

Riferimento: 870/65

Toothed belt clutch bell 30-tooth

Recensioni: 0

Toothed belt clutch bell30-toothpitch 3Mmaterial: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor clutch

Prezzo 86,90 €
Più
In vendita su richiesta

Riferimento: 64/20

pinion gear 22-tooth

Recensioni: 0

Clutch pinion gear incl. flywheel and split taper collet 22-tooth module 1 material: GRP twin ballraced incl. clutch lining fits the glow plug motor

Prezzo 75,80 €
Più
In vendita su richiesta

Riferimento: 64/21

bell pinion gear 22-tooth

Recensioni: 0

Clutch bell pinion gear22-toothmodule 1material: GRPtwin ballracedincl. clutch liningfits the glow plug motor clutch

Prezzo 38,50 €
Più
In vendita su richiesta

Riferimento: 64/2

Flywheel puller

Recensioni: 0

If the flywheel of the clutch is sitting to tight on the tapper of the collet you can use this flywheel puller.For this purpose you remove the nut from the crankshaft, then put the puller on the crankshaft, and turn both socket-head cap screws equally approx. 5 mm into the thread of the flywheel; the flywheel loosens now.The length of the socket-head cap...

Prezzo 9,70 €
Più
In vendita su richiesta

Riferimento: 64/5

Split taper collet 8 mm

Recensioni: 0

Split taper collet 8 mmmaterial: brassfits the glow plug motor clutchA split taper collet has to be assembled so that it fits tightly onto the crankshaft of the engine.If there are problems sliding the split taper collet easily onto the crankshaft, please insert a screwdriver into the slot and try to open it gently. It should now slide onto the shaft...

Prezzo 9,70 €
Più
In vendita su richiesta

Riferimento: 64/8

lining 45 x 40 x 12 mm

Recensioni: 0

Friction between the flywheel and the clutch bell result in a certain amount of wear of the clutch lining.For installation you slightly grind one of the outer edges. Afterwards you press the liner with that edge in front into the clutch bell. To glue in a new clutch liner you use e.g. UHU plus endfest 300, Ord.No. 10/26 or 10/27.Fits the glow plug motor...

Prezzo 23,80 €
Più
In vendita su richiesta

Riferimento: 64/3

Ballrace 8 x 16 x 5 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear.The dimensions of a ballrace mean:inside diameter (I.D.) x outside diameter (O.D.) x thickness. Ballrace 8 x 16 x 5 mmpack of...

Prezzo 11,70 €
Più
In vendita su richiesta

Riferimento: 872/64

Toothed belt clutch bell 22-tooth

Recensioni: 0

Toothed belt clutch bell22-toothpitch XLmaterial: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor clutch

Prezzo 86,90 €
Più
In vendita su richiesta

Riferimento: 870/64

Toothed belt clutch bell 32-tooth

Recensioni: 0

Toothed belt clutch bell 32-tooth pitch 3M material: aluminium twin ballraced incl. clutch lining fits the glow plug motor clutch

Prezzo 86,90 €
Più
In vendita su richiesta

Riferimento: 64/38

bell pinion gear 24-tooth

Recensioni: 0

Clutch bell pinion gear24-toothmodule 1material: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor clutch

Prezzo 86,90 €
Più
In vendita su richiesta

Riferimento: 833/64

Toothed belt clutch 23-tooth

Recensioni: 0

Toothed belt clutchincl. flywheel and split taper collet23-toothpitch 3Mmaterial: aluminiumtwin ballracedincl. clutch liningfits the glow plug motorfor engines up to max. 8.5 cc onlyfits the Sky Dragon model

Prezzo 114,50 €
Più
In vendita su richiesta

Riferimento: 64/36

pinion gear 24-tooth

Recensioni: 0

Clutch pinion gearincl. flywheel and split taper collet24-toothmodule 1material: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor

Prezzo 114,50 €
Più
In vendita su richiesta