Marques

No brand

Toutes les meilleures ventes

Flywheel ø 39.6 x 10.5 mm

64/17
Note 
Flywheel for clutch
  • outer diameter: 39.6 mm
  • height: 10.5 mm
  • fits the glow plug motor clutch
38,50 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description
Flywheel for clutch
  • outer diameter: 39.6 mm
  • height: 10.5 mm
  • fits the glow plug motor clutch
Détails du produit
64/17
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Flywheel ø 39.6 x 10.5 mm

Flywheel ø 39.6 x 10.5 mm

Flywheel for clutch
  • outer diameter: 39.6 mm
  • height: 10.5 mm
  • fits the glow plug motor clutch
Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 64/2

Flywheel puller

Commentaire(s): 0

If the flywheel of the clutch is sitting to tight on the tapper of the collet you can use this flywheel puller.For this purpose you remove the nut from the crankshaft, then put the puller on the crankshaft, and turn both socket-head cap screws equally approx. 5 mm into the thread of the flywheel; the flywheel loosens now.The length of the socket-head cap...

Prix 9,70 €
Détails
En vente sur demande

Référence: 64/20

pinion gear 22-tooth

Commentaire(s): 0

Clutch pinion gear incl. flywheel and split taper collet 22-tooth module 1 material: GRP twin ballraced incl. clutch lining fits the glow plug motor

Prix 75,80 €
Détails
En vente sur demande

Référence: 64/36

pinion gear 24-tooth

Commentaire(s): 0

Clutch pinion gearincl. flywheel and split taper collet24-toothmodule 1material: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor

Prix 114,50 €
Détails
En vente sur demande

Référence: 64/3

Ballrace 8 x 16 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear.The dimensions of a ballrace mean:inside diameter (I.D.) x outside diameter (O.D.) x thickness. Ballrace 8 x 16 x 5 mmpack of...

Prix 11,70 €
Détails
En vente sur demande

Référence: 64/5

Split taper collet 8 mm

Commentaire(s): 0

Split taper collet 8 mmmaterial: brassfits the glow plug motor clutchA split taper collet has to be assembled so that it fits tightly onto the crankshaft of the engine.If there are problems sliding the split taper collet easily onto the crankshaft, please insert a screwdriver into the slot and try to open it gently. It should now slide onto the shaft...

Prix 9,70 €
Détails
En vente sur demande

Référence: 64/8

lining 45 x 40 x 12 mm

Commentaire(s): 0

Friction between the flywheel and the clutch bell result in a certain amount of wear of the clutch lining.For installation you slightly grind one of the outer edges. Afterwards you press the liner with that edge in front into the clutch bell. To glue in a new clutch liner you use e.g. UHU plus endfest 300, Ord.No. 10/26 or 10/27.Fits the glow plug motor...

Prix 23,80 €
Détails
En vente sur demande

Référence: 833/64

Toothed belt clutch 23-tooth

Commentaire(s): 0

Toothed belt clutchincl. flywheel and split taper collet23-toothpitch 3Mmaterial: aluminiumtwin ballracedincl. clutch liningfits the glow plug motorfor engines up to max. 8.5 cc onlyfits the Sky Dragon model

Prix 114,50 €
Détails
En vente sur demande

Référence: 64/42

pinion gear 20-tooth

Commentaire(s): 0

Clutch pinion gearincl. flywheel and split taper collet20-toothmodule 1material: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor

Prix 86,90 €
Détails
En vente sur demande