Steuerstange 2 x 1000 mm, Stahl

Riferimento: 302/1

Barra di coda 20 x 900 mm

Not available

Riferimento: 870/17

Leitwerkadapter 2teilig

Riferimento: 332

Braccio di coda di 31 x 1300 mm, nero

 Tail boom31 x 1.0 x 1300 mmblack

Riferimento: 429/13

Leva posteriore Bell 429 25x1180mm

Not available

Riferimento: 315/1

Barra di coda 25 x 700 mm

Not available

Riferimento: 49/1

Glocke mit Stellring

Riferimento: 834/13

Barra di coda 25 x 910 mm

Not available

Riferimento: 21/15

Kohlefaser-Set für 20 mm

Riferimento: 2/21

Markierungsdecor grün

Riferimento: 313

Braccio di coda di 20 x 0,5 x 790 mm

 Tail boom20 x 0.5 x 790 mmblackweight 59 gTail booms with a wall thickness of 0.5 mm are specially tested for the use in models with electric drive only and must not be used for models powered by combustion engines! The wall thickness is just 0.5 mm for the reduction of weight. Comparative, the weight of a tail boom with 0.8 x 20 x 790 mm is 109 g.

Riferimento: 800/2

Leitwerkhalter 20 mm, 2-teilig

Riferimento: 268/13

Tail boom 31 x 1300 mm

Not available

Riferimento: 840/13

Braccio di coda ballraced 20 x 0,8 x 780

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16

Riferimento: 834/70

Supporto del braccio posteriore, 25 mm

A 2-part GRP tail boom holder keeps a firm hold on the 25 mm ��tail boom. The tail boom holder is screwed between the side frames with socket-head cap screws M 3 x 55 (Ord.No. 90135).

Riferimento: 860/13

Braccio di coda ballraced 25 x 0,8 x 840

 Aluminium tail boom0.8 mm wall thickness25 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16

Riferimento: 305

Braccio di coda di 20 x 0,8 x 780 mm

 Tail boom20 x 0.8 x 780 mmblack