Protection contre l'enlisement pour Lama

Riferimento: 341/409

BTP Lama 1: 4

Riferimento: 330/10

Protezione capottina per Lama

This protective sheath provides effective protection to the cabin of your valuable helicopter, and helps to avoid unsightly scratches. It is simply pulled over the cabin and closed with a hook -and-loop fastener.Cabin sheath for Lamamatching the cabins of the models 3300 and 3400

Riferimento: 134/411

Antena alrededor de 1: 4

Riferimento: 341/419

Tendicinghia pulegge, 6 pz Lama 1/4

1,18 x 3,15 x 0,72 cmPack of 6

Riferimento: 10/96

Anti-collision light with red housing

Riferimento: 1/21

Helmet for pilot William

As you would expect, we can also supply the matching type of GRP helmet for William the Pilot; it is simply pushed into place on his head. If you wish to fit a radio headpiece, you now have plenty of scope for your imagination: a piece of foam rubber, a thin wire mount and a coiled cable are all you need to make this accessory, and the pilot will...

Riferimento: 341/424

Kick bar llama 2 partes 1: 4

Riferimento: 341/405

Pitot 41:4

dimensions: 5.7 x 1.7 x 2.5 cm

Riferimento: 341/520

Battery housing /Lama

dimensions: 7.76 x 3.4 x 5.3 cm

Riferimento: 134/444

Connessioni verricello, 1:4

dimensions:flat: 1.53 x 1.53 x 0.7 cmhigh: 1.29 x 1.29 x 1.14 cmPackage contains: 3x flat + 4x high

Riferimento: 341/420

Vano Batteria, Lama, 1:4

dimensions: 3.2 x 5.25 x 7.75 cm

Riferimento: 340/13

Finta trasmissione

This dummy power unit can be installed on turbine powered helicopters to produce an even more realistic intersection between the turbine and the gearbox.When the imitation rotor brake of the dummy part is pushed over the turbine starter, the rubber connector is spring-loaded in front of the gearbox connection; retaining screws are not required.Dummy power...

Riferimento: 134/410

Antena superior 1: 4

Riferimento: 341/411

Llama estabilización trasera 1: 4

Riferimento: 350/17

Coperchio scarico Ø 90 mm

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine. This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe. Caution: it is essential to allow the exhaust pipes to...

Riferimento: 350/45

CESTELLO SOTTOPANCIA PER LAMA

Great fascination is achieved by active working details on scale models, remember e.g. rotary lights and navigation lights.A working winch adds a special attraction on a model helicopter particularly if it is pivoting and fully functional!Especially on a Alouette III you hardly need fantasy, to see instead of the model the full-size helicopter in your...