Lama BTP 1:5

Riferimento: 330/31

Finestratura a boccia, Lama

Bubble window for Lama Ord.No. 3300 / 3400 / 3401, Rotor ø 2500 mm

Riferimento: 341/445

Pedales llama x2 1: 4

Riferimento: 341/415

Llamada de rescate por radar x2 1: 4

Riferimento: 134/411

Antena alrededor de 1: 4

Riferimento: 134/460

Telephone on board 1:4

dimensions: 1.9 x 1.2 x 6.3 cm

Riferimento: 350/17

Coperchio scarico Ø 90 mm

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine. This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe. Caution: it is essential to allow the exhaust pipes to...

Riferimento: 341/520

Battery housing /Lama

dimensions: 7.76 x 3.4 x 5.3 cm

Riferimento: 341/412

Ingresso aria turbina Lama 1/4

dimensions: 8 x 3.5 x 4.3 cm

Riferimento: 340/13

Finta trasmissione

This dummy power unit can be installed on turbine powered helicopters to produce an even more realistic intersection between the turbine and the gearbox.When the imitation rotor brake of the dummy part is pushed over the turbine starter, the rubber connector is spring-loaded in front of the gearbox connection; retaining screws are not required.Dummy power...

Riferimento: 341/403

Per Lama, 1:4

dimensions: 6 x 8.2 x 0.5 cm2-part

Riferimento: 340/29

Cockpit for Lama, turbine version

Riferimento: 340/5

Snowboards per Lama 1 paio

When full-size helicopters have to land in deep snow, the skids are fitted with "snowboards" to prevent them sinking in.On the model they look really good, and also help the pilot detect the model's orientation in the air.Make your model an eye-catcher and use some rivets for the decoration of the skies."Snowboards" for Lama, 1 pair

Riferimento: 341/414

Lama 1: 4 luz anticolisión trasera

Riferimento: 330/10

Protezione capottina per Lama

This protective sheath provides effective protection to the cabin of your valuable helicopter, and helps to avoid unsightly scratches. It is simply pulled over the cabin and closed with a hook -and-loop fastener.Cabin sheath for Lamamatching the cabins of the models 3300 and 3400

Riferimento: 341/409

BTP Lama 1: 4

Riferimento: 330/5

Set accessori portelli per Bell 47 G III, Lama

Door fittings for large-scale model helicopters do not differ fundamentally from one type to another. However, the size of these accessories is important if the model is to look convincing, otherwise they will look out of scale.Compare the door handle of the Lama with that of the Alouette II, and the difference is obvious.The door fittings set for the...