

No brand
Référence: 2017 E
Référence: 34/30
Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair
Référence: 10/90
The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...
Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M5.
The T-handle of this M5 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.
Política de seguridad
Política de envío
Política de devolución
Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M5.
The T-handle of this M5 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.
Aucun avis n'a été publié pour le moment.
Riferimento: 11/20
Many a glow plug is buried inaccessibly inside the model. This flexible socket spanner can be curved to allow you to reach the plug, and you can keep the spanner curved while you screw the plug in or out. Fits all standard glow plugs.
Riferimento: 11/4
Individual Allen key from the set Ord.No. 11/0:Allen key - for socket-head cap screw M 3
Riferimento: 11/6
Individual Allen key from the set Ord.No. 11/0:Allen key - for socket-head cap screw M 5
Riferimento: 11/1
An imperial Allen key is sometimes your last chance of rescuing a grubscrew whose hexagon socket has given up. This Allen key is only one tenth of a millimetre larger than the standard metric key, but in most cases it will successfully loosen a screw where the socket has been damaged. Heat up the Allen key before you apply it, and the heat will help to...
Riferimento: 11/3
Individual Allen key from the set Ord.No. 11/0:Allen key - for M 4 grub screw and for socket-head cap screw M 2.5
Riferimento: 11/7
Allen key - for socket-head cap screw M 6
Riferimento: 11/2
Individual Allen key from the set Ord.No. 11/0:Allen key - for M 3 grub screw
Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M5.
The T-handle of this M5 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.