Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Silencer system

116/96
Note 

 

  • Silencer system
  • Intake pipe 60 mm
  • Silencer chamber 270 mm
  • Overall Ø 50 mm
  • Manifold: 34 mm hole spacing
  • Tail pipe length 100 mm
  • Weight approx. 250 g
278,30 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

 

  • Silencer system
  • Intake pipe 60 mm
  • Silencer chamber 270 mm
  • Overall Ø 50 mm
  • Manifold: 34 mm hole spacing
  • Tail pipe length 100 mm
  • Weight approx. 250 g
Détails du produit
116/96
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Silencer system

Silencer system

 

  • Silencer system
  • Intake pipe 60 mm
  • Silencer chamber 270 mm
  • Overall Ø 50 mm
  • Manifold: 34 mm hole spacing
  • Tail pipe length 100 mm
  • Weight approx. 250 g
Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 55/8

12 x 28 x 8 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 12 x 28 x 8 mmpack of...

Prix 14,80 €
Détails
En vente sur demande

Référence: 55/1

10 x 19 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 10 x 19 x 5 mmpack of...

Prix 11,70 €
Détails
En vente sur demande

Référence: 116/8

Silicone hose

Commentaire(s): 0

The operating temperature of a tuned pipe or of a silencer has a destructive influence on their supports, if no heat resitant material is used when fixing.Silicone hose11 mm I.D.length approx. 300 mm

Prix 7,40 €
Détails
En vente sur demande

Référence: 11/66

Crankshaft nut socket spanner 10 mm

Commentaire(s): 0

If you want to tighten the crankshaft nut on your engine fully, and still be able to loosen it again without problems, you need the correct size of crankshaft socket spanner. Note, however, that different engines require different sizes, so take care to order the correct item. Crankshaft nut socket spanner 10 mm, for O.S.

Prix 23,90 €
Détails
En vente sur demande

Référence: 71/19

2.5 x 8 x 2.8 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 2.5 x 8 x 2.8 mmpack of...

Prix 12,80 €
Détails
En vente sur demande

Référence: 117/2

Thrust bearing 10 x 24 x 9 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 10 x 24 x 9...

Prix 26,60 €
Détails
En vente sur demande

Référence: 17/24

8 x 14 x 4 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 8 x 14 x 4 mmpack of...

Prix 14,80 €
Détails
En vente sur demande

Référence: 94/6

Thrust bearing 6 x 10 x 3 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 6 x 10 x 3...

Prix 14,80 €
Détails
En vente sur demande

Référence: 64/19

15 x 24 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 15 x 24 x 5 mmpack of...

Prix 14,80 €
Détails
En vente sur demande

Référence: 55/6

12 x 21 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 12 x 21 x 5 mmpack of...

Prix 14,80 €
Détails
En vente sur demande

Référence: 68/51

Swivel bearing 12 x 22 x 10 mm

Commentaire(s): 0

A swivel bearing is fitted with a ball which is capable of rotation in all directions; this application is used in the swashplate. The dimensions of a swivel bearing mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Swivel bearing 12 x 22 x 10 mmpack of 1

Prix 29,80 €
Détails
En vente sur demande

Référence: 55/3

Thrust bearing 10 x 25 x 6 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence.The dimensions of a ballrace mean:inside diameter (I.D.) x outside diameter (O.D.) x thickness.Thrust bearing 10 x 25 x 6...

Prix 16,90 €
Détails
En vente sur demande

Référence: 40/1

4 x 9 x 4 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 4 x 9 x 4 mmpack of...

Prix 11,70 €
Détails
En vente sur demande

Référence: 16/3

Spray can holder

Commentaire(s): 0

This spray can holder can be used with any spray can, and makes it easier to apply the paint evenly. The holder provides an effective means of controlling the spray coat; an additional advantage is that your hands stay clean, as they don't make contact with the paint.

Prix 11,90 €
Détails
En vente sur demande