Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 12,80 €
Détails
En vente sur demande
Toutes les meilleures ventes
Roulements

Roulements

Roulements

Il y a 83 produits.

Affichage 1-12 de 83 article(s)

Filtres actifs

Référence: 57/3

Plain bushes 3 x 8 mm

Commentaire(s): 0

The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. Reasonably priced plain bushes fulfil the same purpose as bearings but they should only be used on the non threaded part of a screw (not on the threaded section) and must be changed as soon as play is detected.  Plain bushes 3 x 8 mm2-partpack of 6Important:...

Prix 11,70 €
Détails
En vente sur demande

Référence: 36/12

Freewheel 12 mm

Commentaire(s): 0

A freewheel is a form of roller bearing which only permits rotation in one direction, as normally found in gears required for auto-rotation. The dimension refers to the outside diameter of the shaft on which the freewheel can run.  Freewheel 12 mmpack of 1

Prix 26,60 €
Détails
En vente sur demande

Référence: 71/12

Flanged bushes 3 x 7 x 3 mm

Commentaire(s): 0

The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same applies, since the flange is not included in the dimensions. Reasonably priced plain bushes fulfil the same purpose as bearings but they should only be used on the non threaded part of a screw (not on the threaded section) and...

Prix 29,80 €
Détails
En vente sur demande

Référence: 36/27

Freewheel 6 mm

Commentaire(s): 0

A freewheel is a form of roller bearing which only permits rotation in one direction, as normally found in gears required for auto-rotation. The dimension refers to the outside diameter of the shaft on which the freewheel can run.  Freewheel 6 mmpack of 1

Prix 14,80 €
Détails
En vente sur demande

Référence: 71/3

Plain bushes 3 x 7 x 3 mm

Commentaire(s): 0

The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. Reasonably priced plain bushes fulfil the same purpose as bearings but they should only be used on the non threaded part of a screw (not on the threaded section) and must be changed as soon as play is detected.  Plain bushes 3 x 7 x 3 mmpack of 12Important:...

Prix 11,70 €
Détails
En vente sur demande

Référence: 117/8

Thrust bearing 8 x 15 x 5 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 8 x 15 x 5...

Prix 14,80 €
Détails
En vente sur demande

Référence: 36/7

Freewheel 10 mm

Commentaire(s): 0

A freewheel is a form of roller bearing which only permits rotation in one direction, as normally found in gears required for auto-rotation. The dimension refers to the outside diameter of the shaft on which the freewheel can run.  Freewheel 10 mmpack of 1

Prix 14,80 €
Détails
En vente sur demande

Référence: 94/3

Thrust bearing 4 x 10 x 3 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 4 x 10 x 3...

Prix 11,70 €
Détails
En vente sur demande

Référence: 96

5 x 13 x 4 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 5 x 13 x 4 mmpack of...

Prix 11,70 €
Détails
En vente sur demande

Référence: 107/24

2 x 5 x 2.3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.   Ballrace 2 x 5 x 2.3 mm pack...

Prix 12,80 €
Détails
En vente sur demande

Référence: 38/2

5 x 16 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.   Ballrace 5 x 16 x 5 mm pack...

Prix 11,70 €
Détails
En vente sur demande

Suivez-nous sur Facebook