Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Extractor screw

830/2
Note 

Extractor screw

  • key size 13
  • for flywheel and split tapper collet on petrol engines
9,80 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Extractor screw

  • key size 13
  • for flywheel and split tapper collet on petrol engines
Détails du produit
830/2
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Extractor screw

Extractor screw

Extractor screw

  • key size 13
  • for flywheel and split tapper collet on petrol engines
Donnez votre avis
16 autres produits dans la même catégorie :
Tail blade balance shaft Aperçu rapide

Référence: 34/9

Tail blade balance shaft

Commentaire(s): 0

If the tail rotor blades are to be balanced accurately, the assembled hub must be included in the balance process. Now you can balance the tail rotor perfectly, and the unit's smooth running will prove it!

Prix 17,00 €
Détails
En vente sur demande
Rotor blade allen key for... Aperçu rapide

Référence: 11/34

Rotor blade allen key for M6 socket-head screws

Commentaire(s): 0

Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M6. The T-handle of this M6 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.

Prix 11,70 €
Détails
En vente sur demande
Ball-link driver with handle Aperçu rapide

Référence: 107/0

Ball-link driver with handle

Commentaire(s): 0

This tiny tool is designed to help you screw pushrods into ball-links. It can either be used in the chuck of an electric drill, in the telescopic handle, or in a 5.5 mm socket.  Ball-link driverwith telescopic handle 11/44

Prix 27,40 €
Détails
En vente sur demande
Assembly spanner Aperçu rapide

Référence: 11/84

Assembly spanner

Commentaire(s): 0

If you want to extract the flywheel and the split tapper collet from the motor you hold the flywheel with the assembly spanner while you turn in the extractor screw.

Prix 12,80 €
Détails
En stock
Die M 2.5 HSS Aperçu rapide

Référence: 70/20

Die M 2.5 HSS

Commentaire(s): 0

Our easy-to-use dies are made of top-quality HSS steel. The bevelled entry to the dies ensures that the thread always starts exactly "square" and cuts cleanly. Good thread-cutting oil is as important as the die itself, as it extends the useful life of the tool several times over.

Prix 46,10 €
Détails
En vente sur demande
Hole cutter up to 16 mm Ø Aperçu rapide

Référence: 11/64

Hole cutter up to 16 mm Ø

Commentaire(s): 0

There are far more holes to be drilled in a helicopter fuselage than just the ordinary air inlet holes. Think of the access holes for the needle valve and the glow plug, openings for the exhaust manifold and the initial stage of cutting window openings. This hole cutter does an excellent job. Hole cutter, up to 16 mm. Here a few hints for making perfect...

Prix 54,60 €
Détails
En vente sur demande
Hammer, weight 230 g Aperçu rapide

Référence: 90/7

Hammer, weight 230 g

Commentaire(s): 0

How do you fix anything to a wooden component using a metric machine screw? The answer is to fit a captive nut as follows: Drill a hole of the right size to accept the nut barrel, then drive the nut's projecting teeth into the wood using a hammer and fairly gentle force; the captive nut is correctly fitted when its disc rests squarely on the surface of...

Prix 27,40 €
Détails
En vente sur demande
Glasspaper file, concave /... Aperçu rapide

Référence: 11/56

Glasspaper file, concave / convex

Commentaire(s): 0

If you enjoy building full-fuselage models you cannot help but appreciate practical tools which make your work easier. The glasspaper file is ideal for final trimming of openings for windows, doors and vent grilles after machining them out. The file is 25 cm long overall, with a sanding area 13 cm long and 2.5 cm wide on each side. The file is supplied...

Prix 12,80 €
Détails
En vente sur demande
Widia disc cutter Aperçu rapide

Référence: 29/11

Widia disc cutter

Commentaire(s): 0

Widia produced a tungsten carbide, derived from "like diamond - Wie Diamant (Ger)". The first Widia tools were available on the open market in 1923. They consisted at that time of approx. 94 % tungsten carbide and 6 % cobalt. Today's types contain additives that improve the hardness etc. The Widia disc cutter is ideal for cutting clean-edged openings in...

Prix 16,90 €
Détails
En vente sur demande
Sanding sponge Aperçu rapide

Référence: 10/77

Sanding sponge

Commentaire(s): 0

The primary use for abrasive sponges is for large-area sanding of wooden and GRP components, but they are also excellent for rubbing down filled surfaces when used wet. Abrasive sponges are also useful for fine-sanding of components with sharp edges and rounded surfaces.

Prix 5,50 €
Détails
En vente sur demande
Protective goggles Aperçu rapide

Référence: 9/5

Protective goggles

Commentaire(s): 0

When handling tools it is in your own interests to read and observe the safety information and constantly to be aware of the possible hazards, before you have a really close encounter with a workpiece which, for whatever reason, flies off. Wear these protective goggles when grinding, turning and machining, and also when you are cutting off steel rod....

Prix 14,80 €
Détails
En vente sur demande
Tubing cutter, up to 15 mm Ø Aperçu rapide

Référence: 11/60

Tubing cutter, up to 15 mm Ø

Commentaire(s): 0

The tubing cutter can handle aluminium, stainless steel and brass tubing up to 15 mm diameter. It can also be used to form a slight internal burr on tubing. For example if you use a tail rotor pushrod running in a PTFE sleeve in aluminium tubing, you can cut the aluminium to length at both ends with the tubing cutter, and the PTFE sleeve will not slip out.

Prix 33,30 €
Détails
En vente sur demande

Suivez-nous sur Facebook

Facebook