Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes
Accessoires spécifiques

Accessoires spécifiques

Accessoires spécifiques

Il y a 33 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 1-12 de 33 article(s)

Filtres actifs

Sanding sponge Aperçu rapide

Référence: 10/77

Sanding sponge

Commentaire(s): 0

The primary use for abrasive sponges is for large-area sanding of wooden and GRP components, but they are also excellent for rubbing down filled surfaces when used wet. Abrasive sponges are also useful for fine-sanding of components with sharp edges and rounded surfaces.

Prix 5,50 €
Détails
En vente sur demande
Ball-link driver with handle Aperçu rapide

Référence: 107/0

Ball-link driver with handle

Commentaire(s): 0

This tiny tool is designed to help you screw pushrods into ball-links. It can either be used in the chuck of an electric drill, in the telescopic handle, or in a 5.5 mm socket.  Ball-link driverwith telescopic handle 11/44

Prix 27,40 €
Détails
En vente sur demande
Ball-link driver 5.5 Aperçu rapide

Référence: 107/1

Ball-link driver 5.5

Commentaire(s): 0

This tiny tool is designed to help you screw pushrods into ball-links. It can either be used in the chuck of an electric drill, in the telescopic handle, or in a 5.5 mm socket.  Ball-link driverfor 5.5 mm socket spanner

Prix 8,40 €
Détails
En vente sur demande
Ball-link driver 4.0 Aperçu rapide

Référence: 107/2

Ball-link driver 4.0

Commentaire(s): 0

This tiny tool is designed to help you screw pushrods into ball-links. It can either be used in the chuck of an electric drill, in the telescopic handle, or in a 5.5 mm socket.  Ball-link driverfor 4 mm telescopic handle.

Prix 8,40 €
Détails
En vente sur demande
Tool case Aperçu rapide

Référence: 21/11

Tool case

Commentaire(s): 0

Tool case, complete empty, alone, including foam to cutsize approx. 275 x 230 x 83 mm

Prix 19,10 €
Détails
En vente sur demande
Glazing panel shears straight Aperçu rapide

Référence: 11/260

Glazing panel shears straight

Commentaire(s): 0

These powerful, sharp shears simplify the task of cutting out vacuum-moulded bodywork components. Glazing panels, dummy fuel tanks etc. are easily cut out along the moulded-in lines using these special shears. We suggest not to cut out anything until you satisfy yourself with the exact dimensions. This is because GRP parts (fuselages etc.) are hand made...

Prix 32,30 €
Détails
En vente sur demande
Glasspaper file, flat Aperçu rapide

Référence: 11/28

Glasspaper file, flat

Commentaire(s): 0

If you enjoy building full-fuselage models you cannot help but appreciate practical tools which make your work easier. The glasspaper file is ideal for final trimming of openings for windows, doors and vent grilles after machining them out. The file is 25 cm long overall, with a sanding area 13 cm long and 2.5 cm wide on each side. The file is supplied...

Prix 14,80 €
Détails
En vente sur demande
Widia disc cutter Aperçu rapide

Référence: 29/11

Widia disc cutter

Commentaire(s): 0

Widia produced a tungsten carbide, derived from "like diamond - Wie Diamant (Ger)". The first Widia tools were available on the open market in 1923. They consisted at that time of approx. 94 % tungsten carbide and 6 % cobalt. Today's types contain additives that improve the hardness etc. The Widia disc cutter is ideal for cutting clean-edged openings in...

Prix 16,90 €
Détails
En vente sur demande
Rotor blade allen key for... Aperçu rapide

Référence: 11/34

Rotor blade allen key for M6 socket-head screws

Commentaire(s): 0

Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M6. The T-handle of this M6 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.

Prix 11,70 €
Détails
En vente sur demande
Ridge cutter Aperçu rapide

Référence: 11/53

Ridge cutter

Commentaire(s): 0

Use this small ridge cutter to remove sharp burrs and edges from aluminium and plastics; e.g. remove sharp edges from an aluminium pipe.

Prix 14,80 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook