Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Tutte le migliori vendite

Sanding primer for wood

10/76
Valutazione 

In full-fuselage helicopters the mechanical system is generally mounted on previously installed wooden bulkheads.
If the bulkheads are to be painted, the wood surface must first be primed. Primer seals the pores in the wood and hardens projecting fibres; they can then be sanded off before the final painted finish is applied.
Painting a primed component produces a smooth surface.

Please bear in mind that glue does not adhere properly to painted surfaces, so areas to be glued must be sanded back to bare wood to ensure optimum adhesion between the parts.

19,00 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

In full-fuselage helicopters the mechanical system is generally mounted on previously installed wooden bulkheads.
If the bulkheads are to be painted, the wood surface must first be primed. Primer seals the pores in the wood and hardens projecting fibres; they can then be sanded off before the final painted finish is applied.
Painting a primed component produces a smooth surface.

Please bear in mind that glue does not adhere properly to painted surfaces, so areas to be glued must be sanded back to bare wood to ensure optimum adhesion between the parts.

Dettagli del prodotto
10/76
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Sanding primer for wood

Sanding primer for wood

In full-fuselage helicopters the mechanical system is generally mounted on previously installed wooden bulkheads.
If the bulkheads are to be painted, the wood surface must first be primed. Primer seals the pores in the wood and hardens projecting fibres; they can then be sanded off before the final painted finish is applied.
Painting a primed component produces a smooth surface.

Please bear in mind that glue does not adhere properly to painted surfaces, so areas to be glued must be sanded back to bare wood to ensure optimum adhesion between the parts.

Scrivi la tua recensione
8 andere Artikel in der gleichen Kategorie:

Seguici su Facebook

Facebook