Marchi

Nessuna marca

Riferimento: 10/90

Canopy latch

Recensioni: 0

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Prezzo 6,20 €
Più
In vendita su richiesta

Riferimento: 060

Ball-end bolt 3.5 mm - M 2.0 x 5.0

Recensioni: 0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Prezzo 13,80 €
Più
In magazzino
Tutte le migliori vendite
  • Networkcode Tech Solution SL

Accessori
Accessori

Accessori

Accessori

Ci sono 68 prodotti.

Visualizzati 1-12 su 68 articoli

Filtri attivi

Riferimento: 800/24

Stabilizzatore grande

Recensioni: 0

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.height 275 mm118 g total weightwith clamp for 20 mm Ø tail booms

Prezzo 21,50 €
Più
In vendita su richiesta

Riferimento: 800/50

Stabilizzare 3-D, fibra di carbonio

Recensioni: 0

When you are attempting high-speed flying in reverse and also certain pirouettes you may find that the helicopter's heading changes due to the influence of the solid vertical stabiliser. That is the basic reason for the development of this special 3-D tail.It is very strong, and its large size removes the need for a tail skid. The stabiliser is...

Prezzo 52,90 €
Più
In vendita su richiesta

Riferimento: 800/25

Stabilizzatore grande

Recensioni: 0

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Prezzo 21,50 €
Più
In vendita su richiesta

Riferimento: 800/4

Stabilizzatore bianco

Recensioni: 0

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Prezzo 27,70 €
Più
In vendita su richiesta

Riferimento: 800/5

Stabilizzare il set rosso

Recensioni: 0

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Prezzo 19,80 €
Più
In vendita su richiesta

Riferimento: 800/52

Stabilizza il set

Recensioni: 0

 Aluminium Stabiliser set largefor trainer models like BENZIN Acrobatic

Prezzo 29,00 €
Più
In vendita su richiesta

Riferimento: 800/55

Set stabilizzatore, fibra di carbonio

Recensioni: 0

Stabiliser set laminated of carbon2-part - extra lightweight!For installation at all trainers when the stabiliser holder Ord.No. 870/17 is present.250 mm high19.5 g total weight

Prezzo 51,30 €
Più
In vendita su richiesta

Riferimento: 800/6

Stabilizzatore giallo

Recensioni: 0

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Prezzo 19,80 €
Più
In vendita su richiesta