Meccaniche a metanolo

Riferimento: 1002/33

Angle gearbox mechanics for twin-rotor helicopter

Riferimento: 37/11

Gearbox cover

Gearbox cover for gearbox housing Ord.No. 37/10, alone.

Riferimento: 37/10

Gearbox housing incl cover

Even though the main gearbox is placed in the centre of the mechanics it is easily accessible for maintenance. For visual checks of gear meshing clearance, and for greasing the main gearbox it is provided with a gearbox cover.

Riferimento: 809/50

SkyFox left side frame

Not available

Riferimento: 1002/30

Internal-fitting mechanics 10 : 1

The advantage of this type of bare mechanics is the system's comparatively low weight and identical lower mounting (same as the Sky Fox).The method of securing the upper mounting screws is left to the builder's discretion.It is a fact of life that any model lovingly built and fitted out with every possible scale detail turns out a little heavier than...

Riferimento: 809/51

SkyFox right side frame

Not available

Riferimento: 41/15

Pinion shaft for 12 mm gear

The pinion shaft (shaft and integral spur gear) is one link in the transmission which transfers the engine's power to the main rotor.Pinion shaft for 12 mm gears The length of both pinion shafts is ideal for the optional installation of a driven tail rotor for auto-rotation landings; fitting does not require the gearbox to be dismanteled.

Riferimento: 44/9

Main gear hub

Not available

Riferimento: 47/10

Spacer 7 x 13 x 5 mm

Spacer 7 x 13 x 5 mm

Riferimento: 42

Bevel gear 6 mm, 16-tooth

 Bevel gear 6 mm16-toothmodule 0.7

Riferimento: 1006/10

Main gear box

The main gearbox is responsible for driving the main and tail rotors. To complete the main gearbox you will need to select a gear with the appropriate number of teeth to match your clutch, and also a gearbox connection which mates with your existing tail rotor drive system.Main gearbox, kit-form. The pinion shaft 41/25 supplied is only suitable for use...

Riferimento: 1006/9

Main gear box with freewheel

If you require a driven tail rotor for auto-rotation, the main gear hub must be fitted with a freewheel; the freewheel on the main rotor shaft then needs to be replaced by a fixed hub mounted on the main rotor shaft.Main gearbox incl. freewheel for driven tail rotor for auto-rotation landings; kit-form. The pinion shaft 41/25 supplied is only suitable for...