Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 12,80 €
Détails
En vente sur demande
Toutes les meilleures ventes
Mécanique méthanol
Mécanique méthanol

Mécanique méthanol

Mécanique méthanol

Il y a 36 produits.

Affichage 1-12 de 36 article(s)

Filtres actifs

Référence: 37/10

Gearbox housing incl cover

Commentaire(s): 0

Even though the main gearbox is placed in the centre of the mechanics it is easily accessible for maintenance. For visual checks of gear meshing clearance, and for greasing the main gearbox it is provided with a gearbox cover.

Prix 29,80 €
Détails
En vente sur demande

Référence: 1002/30

Internal-fitting mechanics 10 : 1

Commentaire(s): 0

The advantage of this type of bare mechanics is the system's comparatively low weight and identical lower mounting (same as the Sky Fox).The method of securing the upper mounting screws is left to the builder's discretion.It is a fact of life that any model lovingly built and fitted out with every possible scale detail turns out a little heavier than...

Prix 629,80 €
Détails
En vente sur demande

Référence: 41/15

Pinion shaft for 12 mm gear

Commentaire(s): 0

The pinion shaft (shaft and integral spur gear) is one link in the transmission which transfers the engine's power to the main rotor.Pinion shaft for 12 mm gears The length of both pinion shafts is ideal for the optional installation of a driven tail rotor for auto-rotation landings; fitting does not require the gearbox to be dismanteled.

Prix 28,10 €
Détails
En vente sur demande

Référence: 1006/10

Main gear box

Commentaire(s): 0

The main gearbox is responsible for driving the main and tail rotors. To complete the main gearbox you will need to select a gear with the appropriate number of teeth to match your clutch, and also a gearbox connection which mates with your existing tail rotor drive system.Main gearbox, kit-form. The pinion shaft 41/25 supplied is only suitable for use...

Prix 153,40 €
Détails
En vente sur demande

Référence: 1006/9

Main gear box with freewheel

Commentaire(s): 0

If you require a driven tail rotor for auto-rotation, the main gear hub must be fitted with a freewheel; the freewheel on the main rotor shaft then needs to be replaced by a fixed hub mounted on the main rotor shaft.Main gearbox incl. freewheel for driven tail rotor for auto-rotation landings; kit-form. The pinion shaft 41/25 supplied is only suitable for...

Prix 186,50 €
Détails
En vente sur demande

Suivez-nous sur Facebook