Marchi

Nessuna marca

Riferimento: 10/90

Canopy latch

Recensioni: 0

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Prezzo 6,20 €
Più
In vendita su richiesta

Riferimento: 060

Ball-end bolt 3.5 mm - M 2.0 x 5.0

Recensioni: 0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Prezzo 13,80 €
Più
In magazzino
Tutte le migliori vendite
  • Networkcode Tech Solution SL

Motores O.S.

Motores O.S.

Ci sono 23 prodotti.

Visualizzati 1-12 su 23 articoli

Filtri attivi

Riferimento: 52/10

Swashplate guide black

Recensioni: 0

For Schweizer 300 (Ord.No. 6031), Hughes 500 (Ord.No. 9005) and Agusta (Ord.No. 9020). Height of the slot 47.0 mm for use with the rotor shaft 35/39.

Prezzo 11,10 €
Più
In vendita su richiesta

Riferimento: 52/20

Swashplate guide

Recensioni: 0

The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws. The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to...

Prezzo 11,10 €
Più
In vendita su richiesta

Riferimento: 68/14

3-D swashplate 10 mm

Recensioni: 0

This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.

Prezzo 92,30 €
Più
In vendita su richiesta

Riferimento: 68/15

Swashplate 5-blade

Recensioni: 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with...

Prezzo 96,90 €
Più
In vendita su richiesta

Riferimento: 68/20

Swashplate driver 10 mm

Recensioni: 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prezzo 67,60 €
Più
In vendita su richiesta

Riferimento: 68/20-5

Swashplate driver for rotor head 705/30

Recensioni: 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prezzo 67,60 €
Più
In vendita su richiesta

Riferimento: 68/21

Ball connector

Recensioni: 0

GRPfor swashplate drivers Ord.No. 68/20 and 68/50

Prezzo 8,30 €
Più
In vendita su richiesta