Brands

No brand

Reference: 10/90

Canopy latch

Review(s): 0

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Price 6.20€
More
On sale upon request

Reference: 060

Ball-end bolt 3.5 mm - M 2.0 x 5.0

Review(s): 0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Price 13.80€
More
In stock
All best sellers
Motores O.S.
Motores O.S.

Motores O.S.

There are 23 products.

Showing 1-12 of 23 item(s)

Active filters

Reference: 52/10

Swashplate guide black

Review(s): 0

For Schweizer 300 (Ord.No. 6031), Hughes 500 (Ord.No. 9005) and Agusta (Ord.No. 9020). Height of the slot 47.0 mm for use with the rotor shaft 35/39.

Price 11.10€
More
On sale upon request

Reference: 52/20

Swashplate guide

Review(s): 0

The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws. The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to...

Price 11.10€
More
On sale upon request

Reference: 68/14

3-D swashplate 10 mm

Review(s): 0

This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.

Price 92.30€
More
On sale upon request

Reference: 68/15

Swashplate 5-blade

Review(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with...

Price 96.90€
More
On sale upon request

Reference: 68/20

Swashplate driver 10 mm

Review(s): 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Price 67.60€
More
On sale upon request

Reference: 68/20-5

Swashplate driver for rotor head 705/30

Review(s): 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Price 67.60€
More
On sale upon request