Hughes MD 520 N 1:5 for Pahl-turbine - Fuselage kit

Riferimento: 2/30

Adesivi di registrazione

Not available

Riferimento: 10/45

Piccolo set bandiera tedesca (adesivo + trasferimento)

TransferGerman flag black-red-golddimensions: 1,5 x 3,0 cm. quantity 2 piecesStickersGerman flag black-red-golddimensions: 2,0 x 3,0 cm. quantity 2 pieces

Riferimento: 904/30

Set di vetri Hughes 500 E

Hughes 500 E glazing setsmoked tintnot trimmedcanopy with side windows complete

Riferimento: 26/7

Serbatoio di cherosene 2,5 l

Tank for kerosene 2500 mlDimensions of bottle: 28.5 x 12 x 8 cm

Riferimento: 3740

Stazione di rifornimento cherosene, 10 l,

Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.

Riferimento: 13/32

Sistema di rifornimento di cherosene

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Riferimento: 26/34

Fascetta stringitubo benzina / kerosene

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Riferimento: 31/34

Kit cloche con pedali

Incl. programmatore per il nuovo controller del motore lavorato volo mount tempo, Lipo 12S, 5 Ah, ca. 12 minuti, a seconda del pesodel modello.Per l'uso con la...

Riferimento: 30/50

Estintore, lunghezza ca. 70mm

Fire extinguishers in the cockpit are mandatory for any scale model helicopter, since the full-size machines are also required to carry them.Our fire extinguisher is available in two different sizes, and it can be mounted in the cockpit in a wide variety of positions.For models up to 2000 mm rotor diameter we recommend the smaller version; the bigger one...

Riferimento: 29/10

Activator spray

For use with low or high viscosity cyano glue. Spray thinly over the glued joint and it sets the glue immediately. Content: 200 ml

Riferimento: 18/10

PTFE tube for tail drive shaft

PTFE is used as a bearing for the 2 mm wire tail drive shaft (Ord.No. 17) or as a support guide for the 2 mm piano wire push rod (Ord.No. 21 and 800/12) Length: approx. 740 mm

Riferimento: 53/18

Dome fittings set for GPH 70 turbine

Swashplate/main shaft adaptor for GPH 70 turbine

Riferimento: 520/16

Exhaust tube for turbine

The outlets on the left and right hand sides offer the necessary cross-section and greatly reduce the forward thrust.This keeps the scale rear outlet while only discharging a small amount of the total exhaust gas.

Riferimento: 424

2-blade-set 1930 mm

Specification 2-blade-set length: 875 mm rotor disc: 1930 mm blade root: 14 mm 1-hole blade chord: 75 mm profile thickness: 11 mm weight: ca. 280 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Riferimento: 10/11

Silicone rubber sealant

This clear, fast-drying silicone rubber sealant does not contain acid solvents. This is particularly important when gluing glazing panels in place, as it does not attack the transparent or painted surfaces! Electronic components such as gyros and servos can be glued in place with this material for an absolutely secure but vibration-damping fixing. Because...

Riferimento: 10/125

Cyano glue, high viscosity

"Instant" cyano-acrylate adhesives ("cyano") are high-strength glues which join materials of all types. Low viscosity (thin) for fine cracks and close-fitting joints; high viscosity (thick) for larger-area joints. Content: 20 g

Riferimento: 10/127

Cyano glue, low viscosity

"Instant" cyano-acrylate adhesives ("cyano") are high-strength glues which join materials of all types. Low viscosity (thin) for fine cracks and close-fitting joints; high viscosity (thick) for larger-area joints. Content: 20 g

Riferimento: 623

Poxan 30

Poxan 30 is a thixotropic thickening agent (it becomes liquid when stirred in) in the form of a white, free-flowing powder specially developed for thickening epoxy resin systems.The addition of 3 - 10 % of powder by weight prevents the resin running off angled or vertical surfaces. Loose weight is 125 g/dm³. Poxan 30100 ml

Riferimento: 10/124

Speedy Combine powder

The Speedy Combine powder fills small holes, gaps at bulkheads and cracks when used in conjunction with cyano glue. The new surface can be sanded back and painted approx. 45 seconds after application. Content: 40 g

Riferimento: 10/123

High power epoxi 200gr resin + 80gr hardener (40min)

Optimal durable resin, ideally suited to build model helicopters, whether it is to stick a wooden frame or to join GRP parts. For better processing, we recommend mixing the resin with Poxan (Ord No. 623) to thicken.

Riferimento: 10/37

Silicone oil

This clear, colourless silicone oil is particularly good for RC helicopters. Its excellent viscosity and temperature characteristics mean that it can be applied sparingly and remains effective for long periods (very low evaporation rate). Silicone oil is a surfactant lubricant which does not become greasy and contains no corrosive ingredients. It forms a...

Riferimento: 10/360

Vario Extrem Grease

Everybody knows the all round Vario titanium grease, Ord.No, 10/36. It isused for lubricating gearboxes and all kind of gears and does a reliable job.Now another grease even beats this good product: Vario Extreme grease (Ord.No. 10/360) is a special grease that adheres even better and resists even morethe centrifical force. The 10 ml injector can be used...

Riferimento: 90220

Countersunk screw 1.3 x 10

The glazing panels of full-size helicopters feature external frames which press the glass firmly into position; they are retained by countersunk cross-point screws. On our models we can imitate the window frame by applying a narrow painted stripe. True, it is somewhat time-consuming to mask off the panels before painting, but the final result is very...

Riferimento: 90221

Countersunk screw 1.3 x 10

The glazing panels of full-size helicopters feature external frames which press the glass firmly into position; they are retained by countersunk cross-point screws. On our models we can imitate the window frame by applying a narrow painted stripe. True, it is somewhat time-consuming to mask off the panels before painting, but the final result is very...

Riferimento: 1005/62

Rotorkopf für Turbinen-MechanikOrd.No. 1005/62