Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Widia disc cutter

29/11
Valutazione 



Widia produced a tungsten carbide, derived from "like diamond - Wie Diamant (Ger)". The first Widia tools were available on the open market in 1923. They consisted at that time of approx. 94 % tungsten carbide and 6 % cobalt. Today's types contain additives that improve the hardness etc.
The Widia disc cutter is ideal for cutting clean-edged openings in GRP fuselages. The shank fits any mini-electric drill.
For cutting window openings you should prepare the corners with the hole cutter beforehand, otherwise there is a danger of over-shooting the lines. The shank fits any mini-electric drill with collet chuck of 3.3 mm.
 

  • Widia disc cutter
  • pack of 1
  • rigid variation.

Wear protective goggles!

16,90 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione



Widia produced a tungsten carbide, derived from "like diamond - Wie Diamant (Ger)". The first Widia tools were available on the open market in 1923. They consisted at that time of approx. 94 % tungsten carbide and 6 % cobalt. Today's types contain additives that improve the hardness etc.
The Widia disc cutter is ideal for cutting clean-edged openings in GRP fuselages. The shank fits any mini-electric drill.
For cutting window openings you should prepare the corners with the hole cutter beforehand, otherwise there is a danger of over-shooting the lines. The shank fits any mini-electric drill with collet chuck of 3.3 mm.
 

  • Widia disc cutter
  • pack of 1
  • rigid variation.

Wear protective goggles!

Dettagli del prodotto
29/11
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Widia disc cutter

Widia disc cutter



Widia produced a tungsten carbide, derived from "like diamond - Wie Diamant (Ger)". The first Widia tools were available on the open market in 1923. They consisted at that time of approx. 94 % tungsten carbide and 6 % cobalt. Today's types contain additives that improve the hardness etc.
The Widia disc cutter is ideal for cutting clean-edged openings in GRP fuselages. The shank fits any mini-electric drill.
For cutting window openings you should prepare the corners with the hole cutter beforehand, otherwise there is a danger of over-shooting the lines. The shank fits any mini-electric drill with collet chuck of 3.3 mm.
 

  • Widia disc cutter
  • pack of 1
  • rigid variation.

Wear protective goggles!

Scrivi la tua recensione
16 andere Artikel in der gleichen Kategorie:

Seguici su Facebook

Facebook