Servo frame, GFK, for X-Treme

Référence: 47/10

Spacer 7 x 13 x 5 mm

Spacer 7 x 13 x 5 mm

Référence: 833/44

Toothed belt pulley 55-tooth 3M

Toothed belt pulley 55-tooth.

Référence: 42/19

Bevel gear 6 mm, 19-tooth

 Bevel gear6 mm Ømodule 0.719-tooth

Référence: 870/53

Bearing plate, GFK

Not available

Référence: 871/102

Main gear, 102 teeth

Not available

Référence: 44/45

Couronne 58 dents

Gear 58-tooth Delrin The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Référence: 809/200

SkyFox side frames with cooling duct

Not available

Référence: 4/30

90° Nippel mit Zollgewinde

Référence: 42

Bevel gear 6 mm, 16-tooth

 Bevel gear 6 mm16-toothmodule 0.7

Référence: 41/25

Pinion shaft 16.5 mm - for AR

The pinion shaft (shaft and integral spur gear) is one link in the transmission which transfers the engine's power to the main rotor.Pinion shaft with 16.5 mm gear depthsolely for the use with the freewheel bell Ord.No. 36/40or with the hub bell Ord.No. 36/45The length of both pinion shafts is ideal for the optional installation of a driven tail rotor for...

Référence: 871/22

Pignon 22 dents

Not available

Référence: 809/51

SkyFox right side frame

Not available

Référence: 4/7

Mechanics mount, X-Treme

Not available

Référence: 44/70

Couronne 65 dents

Gear 65-tooth Delrin

Référence: 1006/9

Main gear box with freewheel

If you require a driven tail rotor for auto-rotation, the main gear hub must be fitted with a freewheel; the freewheel on the main rotor shaft then needs to be replaced by a fixed hub mounted on the main rotor shaft.Main gearbox incl. freewheel for driven tail rotor for auto-rotation landings; kit-form. The pinion shaft 41/25 supplied is only suitable for...

Référence: 44/9

Main gear hub

Not available