Marco vertical delantero, X-Treme

Reference: 44/58

Gear 52-tooth

The combination of 52 : 32 teeth is used for the Sky Fox Boxer model, driven by a 4-stroke boxer motor with 2 x 13.26 cc capacity. 2-stroke glow plug engines (which are fitting our models because of performance and dimensions), don't achieve a satisfying result with this gear ratio.The illustration shows a symbol with the number of teeth of the main gear....

Reference: 809/200

SkyFox side frames with cooling duct

Not available

Reference: 1006/10

Main gear box

The main gearbox is responsible for driving the main and tail rotors. To complete the main gearbox you will need to select a gear with the appropriate number of teeth to match your clutch, and also a gearbox connection which mates with your existing tail rotor drive system.Main gearbox, kit-form. The pinion shaft 41/25 supplied is only suitable for use...

Reference: 251/200

Kit for lowering the tail output, X-Treme

When the X-Treme mechanics are mounted in certail fuselage such as Agusta, UH-1D or Dauphin, the tail output needs to be lower. This kit lowers the tail output.

Reference: 4/30

90° Nippel mit Zollgewinde

Reference: 809/51

SkyFox right side frame

Not available

Reference: 37/11

Gearbox cover

Gearbox cover for gearbox housing Ord.No. 37/10, alone.

Reference: 870/6

Gyro plate GFK, X-Treme

Not available

Reference: 44/52

Gear 52-tooth

Gear 52-tooth GRP The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Reference: 870/2

RC frame, GFK, for X-Treme

Not available

Reference: 37/10

Gearbox housing incl cover

Even though the main gearbox is placed in the centre of the mechanics it is easily accessible for maintenance. For visual checks of gear meshing clearance, and for greasing the main gearbox it is provided with a gearbox cover.

Reference: 871/2

Servo plate CFK for throttle Servo, X-Treme

Not available

Reference: 44/10

Gear 55-tooth

Gear 55-tooth GRP The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Reference: 44/45

Gear 58-tooth

Gear 58-tooth Delrin The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Reference: 871/102

Main gear, 102 teeth

Not available

Reference: 44/9

Main gear hub

Not available