Tank für Kerosin, 2 l für Bell 412

Référence: 26/6

Réservoir pour Kérosène 2,5 l pour JetRanger PHT-3

Tank for kerosene, 2500 mlalternative fueltank, larger capacity

Référence: 13/28

Tanknippel für Benzin/Kerosin/Methanol

Référence: 830/68

Filtre à essence, mailles fines

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Référence: 26/13

Fuel tank clunk big

Not available

Référence: 26/70

Réservoir en Kevlar 2.8 l pour Kérosène et pétrole

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all tested with air pressure on leaks to make sure that they are 100% leak-proof, when they arrive at your workshop. They fit in the Vario turbine Ecureuil fuselage, that we recommend the plastic tank Ord.No. 26/7 for.When...

Référence: 791/26

Réservoir pour Kérosène 1,5 l

Kerosene Tank 1.5 l, GRP, with accessories, for Cobra with Turbine

Référence: 10/67

Kraftstoff-Filter für Methanol

Référence: 26/2

Bouchon en caoutchouc

Rubber cap useful to seal fuel lines on the pit box or fuel tank nipples pack of 4

Référence: 26/1

Bouchon de durite

Fuel tubing plug pack of 3

Référence: 641/26

Réservoir Air-Crane, en GFK, version pour réacteur

Component part for fuselage Air-Crane, Ord.No. 6410

Référence: 860/26

Tank 540 ccm für Methanol

Référence: 26/20

Pendelsieb für Methanol

Référence: 10/82

Schlauch für Methanol 1 m

Référence: 26/34

Collier essence - kérosène

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Référence: 13/32

Systéme de remplissage pour kérosène

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Référence: 830/83-50

Durite d'essence, rouleau 50 m

Fuel tubing for petrolapprox. 50 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems!