Reference: 1020/20

Crankshaft nut 1/4" 28 UNF

 Content of the package1 piece

Reference: 907/67

Fan for NOTAR system

Reference: 64/20

pinion gear 22-tooth

Clutch pinion gear incl. flywheel and split taper collet 22-tooth module 1 material: GRP twin ballraced incl. clutch lining fits the glow plug motor

Reference: 310/1

Tuned pipe holder 25 mm

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Ord.No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 25 mm Ø tail boom

Reference: 59/0

Spacer washer for motor mount

  Spacer washer for motor mount 3,0 x 12 mm pack of 4

Reference: 116/35

90 degree manifold

 Content of the package1 piece

Reference: 67/55

Turbo-fan, 1/4" 28 UNF

Reference: 64/38

bell pinion gear 24-tooth

Clutch bell pinion gear24-toothmodule 1material: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor clutch

Reference: 310/12

Tuned pipe holder X-Treme

Engines with rear exhaust enable the installation of the tuned pipe underneath the mechanics of a trainer helicopter, mounted at the mechanics.Depending on the kind of the engine the sizes of the tuned pipes vary in size. The difference of these sets is due to the diameter of the fastening clamp.Tuned pipe holderset suitable for tuned pipe 116/16

Reference: 1024/25

O-Ring 18 mm für VergaserhalsOrd.No. 1024/25

Reference: 59/12

Motor mount for electric mechanics 1002/80 & 1002/82

Ø 303 x 120°

Reference: 67/50

Turbo-fan, 8 mm and 5/16"