Stabiliser set, carbon fibre

Reference: 802/17

Strut holder - 25 mm

  Content of the package 1 piece

Reference: 800/52

Stabiliser set

 Aluminium Stabiliser set largefor trainer models like BENZIN Acrobatic

Reference: 31/7

Inserto de soporte de pluma trasera

Reference: 870/30

Streben-Set, CFK

Reference: 860/30

CFK-Rohr 8 x 6 x 700 mm

Reference: 800/20

Tail skid red

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Reference: 831/6

Adapter für Vorbau Benzin-Trainer

Reference: 800/24

Stabiliser set large

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.height 275 mm118 g total weightwith clamp for 20 mm Ø tail booms

Reference: 260/38

Strut for motor

Strut for motor, XLV.

Reference: 860/11

Heckrohrhalter, 2fach kugelgelagert

Reference: 802/24

Kühlluftschacht Boxer

Reference: 860/10

Streben-Set, CFK

Reference: 800/25

Stabiliser set large

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Reference: 260/11

Stabiliser set, XLV

GRP Stabiliser set for XLV Trainer.

Reference: 800/21

Tail skid yellow

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Reference: 800/37

Canopy holder 26 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.