Pod and Boom

Reference: 302/1

Tail boom 20 x 900 mm

Not available

Reference: 10/90

Canopy latch

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Reference: 810/9

Sky Fox white incl. decor

White canopy with smoked windows.If prefered the canopies of the Sky Fox series can be interchanged.They are pre-finished, decals annexed.Please take care to always choose the correct length canopy holder.

Reference: 13/9

Kufenrohr 10 mm, schwarz

Reference: 8303

BENZIN Acrobatic

Reference: 800/24

Stabiliser set large

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.height 275 mm118 g total weightwith clamp for 20 mm Ø tail booms

Reference: 2682

XLC V2 lifting helicopter

The XLC helicopter is designed as a load-carrier, and is capable of transporting a payload of up to 15 kg in addition to its airframe weight of around 17 kg. The fuel tank capacity of around 9.5 litres is also generous, permitting extended flight times. However, please note that a full tank halves the maximum possible payload. The low vibration levels of...

Reference: 800/39

Sliding cabin holder, alone

Sliding cabin holder, alone.

Reference: 301

Tail boom 20 x 0.8 x 900 mm, titanium

 Tail boom20 x 0.8 x 900 mmtitanium

Reference: 800/50

3-D stabiliser, carbon fibre

When you are attempting high-speed flying in reverse and also certain pirouettes you may find that the helicopter's heading changes due to the influence of the solid vertical stabiliser. That is the basic reason for the development of this special 3-D tail.It is very strong, and its large size removes the need for a tail skid. The stabiliser is...

Reference: 809/11

Sky Fox white incl. decor

White canopy with clear windowsIf prefered the canopies of the Sky Fox series can be interchanged.They are pre-finished, decals annexed.Please take care to always choose the correct length canopy holder.

Reference: 10/43

Kufenendkappe 12 mm