Electric motor Kontronik Pyro 850-24 LOrd.No. 3308/15

Reference: 59/11

Motorträger

Reference: 3308/9

Kontronik TelMe Futaba

The TelMe module is the interface between a KOTRONIK ESC with module port and a Futaba receiver prepared for telemetry. TelMe is recognized automatically by the ESC and the correct data stream is started.Generally it's necessary that the transmitter uses FASSTest communication.Be sure that you update your Futaba transmitter, ProgUNIT / ProgDISC and ESC to...

Reference: 3308/12

Electric motor Kontronik Pyro 700-45 L

Specifications:450 RPM/Vmax. 30,000 RPM6 mm shaft10 poles38.5 mm free shaft length395 g / 13.9 oz2.5 kW32 mΩ Ri

Reference: 995/2

Conmutador HV y LiPo para propulsión por turbina

Reference: 3311

Electric motor set for X-Treme trainer

For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set).Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixingsDue to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-52 from...

Reference: 59/40

Motorträger mit Zubehör für Elektromotoren mit 8 mm Welle

Reference: 834/100

Petrol Acrobatic conversion set for Bo 105

So you own a Petrol Acrobatic 8304 and would like to install the mechanics in a BO 105?You will need to change the gearbox reduction ratio, and this can be accomplished with this conversion set, which also contains all the other accessory items you require.Petrol Acrobatic conversion set, for converting 8304 mechanics into 1002/40.

Reference: 3308/11

Electric motor Kontronik Pyro 800-40 L

Specifications:400 RPM/VMax. 30,000 RPM8 mm shaft14 poles55 mm free shaft length500 g / 17.6 oz5 kW18 mΩ Ri

Reference: 3308/4

Kontronik ProgUNIT

Reference: 3302/3

ROXXY BL Control 975-12 ReglerOrd.No. 3302/3

Reference: 3306

Juego de accionamiento eléctrico Ø1680 mm multihoja / 1810 mm 2 hojas 6S

Reference: 3308/13

Electric motor Kontronik Pyro 700-34 L

Specifications:340 RPM/Vmax. 30,000 RPM6 mm shaft14 poles38.5 mm free shaft length395 g / 13.9 oz2.5 kW32 mΩ Ri

Reference: 3302/4

Programmer V2Ord.No. 3302/4

Reference: 3304

Motor Set for turbine/electric mechanics

Incl. motor, controller, new machined motor mount Flight time, 12S LiPo, 8 Ah, approx. 12 Minutes, depending on the model weight.For use with Vario Turbine electric mechanics 1002/76, 1002/77 and 1002/78:1002/76: BK 117, Ord.No. 7700; Hughes 500E, Ord.No. 90041002/77: Bo 105, Ord. No. 6005; Airwolf, Ord.No. 2004; Bell 430, Ord.No. 4340, Bell 230, Ord.No....

Reference: 3322

Electric drive set for Lama 1.80 m

Not available

Reference: 3307

Electric Motor set for Benzin mechanics 12S

For the conversion of benzin mechanics to electric