Large mirror Lama 1:4

Riferimento: 341/419

Tendicinghia pulegge, 6 pz Lama 1/4

1,18 x 3,15 x 0,72 cmPack of 6

Riferimento: 340/13

Finta trasmissione

This dummy power unit can be installed on turbine powered helicopters to produce an even more realistic intersection between the turbine and the gearbox.When the imitation rotor brake of the dummy part is pushed over the turbine starter, the rubber connector is spring-loaded in front of the gearbox connection; retaining screws are not required.Dummy power...

Riferimento: 330/5

Set accessori portelli per Bell 47 G III, Lama

Door fittings for large-scale model helicopters do not differ fundamentally from one type to another. However, the size of these accessories is important if the model is to look convincing, otherwise they will look out of scale.Compare the door handle of the Lama with that of the Alouette II, and the difference is obvious.The door fittings set for the...

Riferimento: 341/403

Per Lama, 1:4

dimensions: 6 x 8.2 x 0.5 cm2-part

Riferimento: 341/408

Serbatoio Olio piccolo, Lama, 1:4

dimensions: 6.8 x 1.8 x 6.8 cm

Riferimento: 341/420

Vano Batteria, Lama, 1:4

dimensions: 3.2 x 5.25 x 7.75 cm

Riferimento: 1/21

Helmet for pilot William

As you would expect, we can also supply the matching type of GRP helmet for William the Pilot; it is simply pushed into place on his head. If you wish to fit a radio headpiece, you now have plenty of scope for your imagination: a piece of foam rubber, a thin wire mount and a coiled cable are all you need to make this accessory, and the pilot will...

Riferimento: 341/509

BTP Lama 1:5

dimensions: main part: 9.5 x 4.95 x 6.4 cm6-part

Riferimento: 341/421

Rueda de ventilador Lama 1: 4

Riferimento: 341/418

Reinforcements for skis Lama 1:4

Riferimento: 10/96

Anti-collision light with red housing

Riferimento: 340/2

Accessori per Lama turbina

The suckering ducts are on the model exactly on the same place as the original ones in position to the turbine on the full-size helicopter.

Riferimento: 341/36

CESTELLO SOTTOPANCIA PER LAMA

Load basket for Lamalength:410 mmwidth:100 mmheight70 mm

Riferimento: 350/17

Coperchio scarico Ø 90 mm

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine. This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe. Caution: it is essential to allow the exhaust pipes to...

Riferimento: 341/416

Espejo Lama 1: 4

Riferimento: 341/411

Llama estabilización trasera 1: 4