Separate pump holder and hand wind pump

Référence: 26/31

Spritschlauch-Klemme

Référence: 26/5

Réservoir pour Kérosène 1,25 l

Tank for Kerosene, 1250 ml, 2 x required for the Lama

Référence: 26/20

Pendelsieb für Methanol

Référence: 830/24

Prise de remplissage M5, coudée

Fuel tank nipple with bend, M5.Content of the package: 2 pieces

Référence: 412/26

Réservoir pour Kérosène 2 l pour Bell 412

dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)

Référence: 26/6

Réservoir pour Kérosène 2,5 l pour JetRanger PHT-3

Tank for kerosene, 2500 mlalternative fueltank, larger capacity

Référence: 26/7

Réservoir pour Kérosène 2,5 l

Tank for kerosene 2500 mlDimensions of bottle: 28.5 x 12 x 8 cm

Référence: 26/12

Tankpendel 2 x 4 mm für Methanol

Référence: 26/34

Collier essence - kérosène

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Référence: 140/26

Kerosintank AW 139

Not available

Référence: 13/27

Carenado de la válvula de llenado

Référence: 26/25

Filtre pour prise d'air du réservoir

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Référence: 26/50

Réservoir en Kevlar 1.4 l pour Kérosène et pétrole

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...

Référence: 26/10

Zusatztank, ca. 68 ccm für Methanol

Référence: 26/4

Tank 400 ccm Benzin/Methanol

Référence: 26/60

Kevlartank para Queroseno 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.When ordering, one tank is supplied.When mounting the lid, please fix the screws cross-wise using blue loctite until you have...