Petrol fuel tubing 1 m

Reference: 834/26

Tank 540 ccm für Benzin

Reference: 26/6

Tank for kerosene 2.5 l for JetRanger PHT-3

Tank for kerosene, 2500 mlalternative fueltank, larger capacity

Reference: 3721

Geared pump for petrol, kerosene and methanol

Geared pumpfor petrol, kerosene and methanolwith accessories

Reference: 26/11

O-Ringe für Tank 26/10, 1x4mm für Methanol

Reference: 412/26

Fuel tank for Kerosene 2 l for Bell 412

dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)

Reference: 26/100

Benzin kit incl. fuel tank 540 ccm

Not available

Reference: 26

Tank 500 ccm Benzin/Methanol

Reference: 3741

Separate pump holder and hand wind pump

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.

Reference: 13/25

Válvula de llenado para metanol y bencina

Reference: 830/26

Tank 540 ml for petrol

Tank 540 ml, petrol-resistantincluding the requested accessories for installation in a Benzin-Trainer or in a petrol mechanics.The CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel...

Reference: 10/67

Kraftstoff-Filter für Methanol

Reference: 13/27

Carenado de la válvula de llenado

Reference: 26/2

Rubber cap

Rubber cap useful to seal fuel lines on the pit box or fuel tank nipples pack of 4

Reference: 830/68

Fine-mesh petrol and kerosine filter

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Reference: 13/28

Tanknippel für Benzin/Kerosin/Methanol

Reference: 800/26

Tank 540 ccm für Methanol