Kraftstoffbehälter 2,5 Liter Tank

Référence: 140/26

Kerosintank AW 139

Not available

Référence: 10/83

Bride de fixation

Content of the package: 4 pieces

Référence: 13/32

Systéme de remplissage pour kérosène

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Référence: 13/27

Carenado de la válvula de llenado

Référence: 26/5

Réservoir pour Kérosène 1,25 l

Tank for Kerosene, 1250 ml, 2 x required for the Lama

Référence: 3741

support de Pompe a carburant

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.

Référence: 830/24

Prise de remplissage M5, coudée

Fuel tank nipple with bend, M5.Content of the package: 2 pieces

Référence: 13/28

Tanknippel für Benzin/Kerosin/Methanol

Référence: 26

Tank 500 ccm Benzin/Methanol

Référence: 26/32

Schlauchsicherung für Methanol

Référence: 13/25

Válvula de llenado para metanol y bencina

Référence: 26/20

Pendelsieb für Methanol

Référence: 791/26

Réservoir pour Kérosène 1,5 l

Kerosene Tank 1.5 l, GRP, with accessories, for Cobra with Turbine

Référence: 791/27

Réservoir intérieur pour Cobra 2,2 l

The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.

Référence: 3740

Station de carburant, kérosène 10 l

Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.

Référence: 26/60

Kevlartank para Queroseno 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.When ordering, one tank is supplied.When mounting the lid, please fix the screws cross-wise using blue loctite until you have...