Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Référence: 82/52
Spacer washer for SKS rotor head Content of the package: 2 pieces
Référence: 707
The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).
Référence: 71/56
Pitch mixer centre piece, aluminium, 12 mm Ø
Référence: 82/50
Rocker, aluminium, for rotor head 702/75, alone.
Référence: 74/19
O-ring 1.5 x 19 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Référence: 832/87
A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar, suitable for the rotor head 722/72.Content of the package: 2 pieces
Référence: 79/13
The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
Référence: 72/45
Aluminium centre piece for 12 mm Ø main shaft
Référence: 72/50
Electro rotor head centre piece, alu.
Référence: 702/76
This blade holder was specially developed for the large Bell 47 G III with a rotor diameter of 2.36 m. It has a 22 mm blade throat and a 6 mm Ø bore for the retaining screw, i.e. the matching blade holder screws and self-locking nuts are M6 in size.
Référence: 71/4
Pitch mixer centre piece, aluminium, 10 mm ∅
Référence: 832/78
This mixer lever from aluminium matches the dimensions of the rotor head 722/72 (e.g. model Robinson R22) with a max. rotor disc of 2 500 mm.
Référence: 73/15
Thrust bearing shaft8 Ø x 115.9 mm
Référence: 71/26
Curved link Content of the package: 2 pieces
Référence: 68/26
Swashplate link piece, straight. Content of the package: 2 pieces
