Adaptador M8" hexagonal para arranque

Reference: 4305

Glow plug cold

hot engine - cold plug (Summer) cold engine - hot plug (Winter)

Reference: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Reference: 64/52

Hexagon shaft 150 mm

Component part for the starter extension; see Ord.No. 64/46 resp. 64/50.

Reference: 28/13

Contact socket gold-plated

 Content of the package1 piece

Reference: 7/68

Startadapter, GFK

Reference: 67/16

Silicone ring for starter system

Silicone ring for starter system Ord.No. 67/13 pack of 1

Reference: 115/15

Flex hose 12 x 170 mm

 Content of the package1 piece

Reference: 64/39

Silicone cable

Silicone cableapprox. 1.5 msuitable for any starter and can also be used as a battery charger lead for electric flight.

Reference: 830/25

Flexschlauch für Kühlluftführung

Reference: 64/4

Propeller driver

 Content of the package1 piece

Reference: 67/45

Nut, 1/4" 28 UNF

 Content of the package1 piece

Reference: 28

Glow plug connector set

 Content of the packagecomplete as shown

Reference: 115/11

PTFE pipe 20 x 2.5 x 100 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 64/66

Luftschrauben-Set

Reference: 116/2

Spring clip for PTFE tube

 Spring clippack of 2for mounting PTFE pipes 115/11

Reference: 64/50

Starter extension, 150 mm shaft

The starter system with 10 mm freewheel and hexagon shaft has proved excellent in practice. If you own this system and wish to use it to start engines with a propeller fitted, or use it on a fan with its outer cone, you can convert the starter system very easily.