Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 400 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 25-36 de 400 article(s)

Filtres actifs

Blade holder bolts M 4 x 26... Aperçu rapide

Référence: 059

Blade holder bolts M 4 x 26 mm G12

Commentaire(s): 0

Pack of 3 with self-locking nuts M 4 Tip: To avoid losing those blade holder screws - push them straight back into the blade holders and fit the nuts loosely, than you know where they are next time when you assemble the model.

Prix 9,70 €
Détails
En vente sur demande
Plain bushes 3 x 7 x 3 mm Aperçu rapide

Référence: 71/3

Plain bushes 3 x 7 x 3 mm

Commentaire(s): 0

The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. Reasonably priced plain bushes fulfil the same purpose as bearings but they should only be used on the non threaded part of a screw (not on the threaded section) and must be changed as soon as play is detected.  Plain bushes 3 x 7 x 3 mmpack of 12Important:...

Prix 13,50 €
Détails
En vente sur demande
Three-armed gripper Aperçu rapide

Référence: 9/11

Three-armed gripper

Commentaire(s): 0

This handy three-armed gripper acts as a finger-extension for placing screws and nuts in difficult, small and inaccessible places.  Three-armed grippertotal length 115 mm

Prix 11,70 €
Détails
En vente sur demande
Thrust bearing 8 x 15 x 5 mm Aperçu rapide

Référence: 117/8

Thrust bearing 8 x 15 x 5 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 8 x 15 x 5...

Prix 17,00 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook