Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 83 produits.

Affichage 1-12 de 83 article(s)

Filtres actifs

  • Catégories : Motores O.S.
  • Catégories : Réservoirs

Référence: 830/27

Réservoir 540 cm³ pour kérosène

Commentaire(s): 0

Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...

Prix 37,50 €
Détails
En vente sur demande

Référence: 52/10

Swashplate guide black

Commentaire(s): 0

For Schweizer 300 (Ord.No. 6031), Hughes 500 (Ord.No. 9005) and Agusta (Ord.No. 9020). Height of the slot 47.0 mm for use with the rotor shaft 35/39.

Prix 14,70 €
Détails
En vente sur demande

Référence: 26/50

Réservoir en Kevlar 1.4 l pour Kérosène et pétrole

Commentaire(s): 0

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...

Prix 349,10 €
Détails
En vente sur demande

Suivez-nous sur Facebook