Accueil

Filtrer par

Disponibilité

Disponibilité

Prix

Prix

  • 4,00 € - 320,00 €

Catégories

Catégories

Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 156 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 37-48 de 156 article(s)

Filtres actifs

Tool case set Aperçu rapide

Référence: 11/35

Tool case set

Commentaire(s): 0

We strongly recommend that when you begin assembling your first helicopter you use the correct combination of tools right from the start. This tool case includes Allen keys for grubscrews from M 3 to M 5, a straight-point screwdriver, a cross-point screwdriver, M 3 and M 4 box spanners and thread-lock fluid. The ball-link driver fits into the small box...

Prix 94,20 €
Détails
En vente sur demande
Thread-lock fluid... Aperçu rapide

Référence: 10/23

Thread-lock fluid high-strength, 10 ml

Commentaire(s): 0

Use thread-lock fluid to prevent screws loosening themselves through vibrations.If you wish to use it on a screw please note the difference between types: medium-strength "blue" can be released again if the correct tool is used. High-strength "green" adheres so firmly that the joint can only be released by applying heat, and with plastic parts this could...

Prix 14,80 €
Détails
En vente sur demande
Swashplate jig Aperçu rapide

Référence: 68/17

Swashplate jig

Commentaire(s): 0

Use this swashplate jig to adjust the pushrods of the X-Treme, X-PERIENCE, XLV and Robinson R22 mechanics.

Prix 19,40 €
Détails
En vente sur demande
Glazing panel shears straight Aperçu rapide

Référence: 11/260

Glazing panel shears straight

Commentaire(s): 0

These powerful, sharp shears simplify the task of cutting out vacuum-moulded bodywork components. Glazing panels, dummy fuel tanks etc. are easily cut out along the moulded-in lines using these special shears. We suggest not to cut out anything until you satisfy yourself with the exact dimensions. This is because GRP parts (fuselages etc.) are hand made...

Prix 32,30 €
Détails
En vente sur demande
Pushrod calipers Aperçu rapide

Référence: 11/85

Pushrod calipers

Commentaire(s): 0

Model helicopter building instructions always state pushrod length as measured from ball centre to ball centre.Determining this dimension using conventional measuring tools is not really much more accurate than estimating the length.complete with measuring holders

Prix 43,90 €
Détails
En vente sur demande
Twist drill 1.5 mm Aperçu rapide

Référence: 11/70

Twist drill 1.5 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Flexible glow plug socket... Aperçu rapide

Référence: 11/20

Flexible glow plug socket spanner

Commentaire(s): 0

Many a glow plug is buried inaccessibly inside the model. This flexible socket spanner can be curved to allow you to reach the plug, and you can keep the spanner curved while you screw the plug in or out. Fits all standard glow plugs.

Prix 36,50 €
Détails
En vente sur demande
Swashplate jig Aperçu rapide

Référence: 68/4

Swashplate jig

Commentaire(s): 0

The pushrods from the swashplate to the rotor head must be set to identical lengths.Just slip the swashplate jig under the swashplate, and the swashplate will automatically be set parallel to the dome plate and at right-angles to the rotor shaft. You can now set up all your linkages with confidence.

Prix 19,40 €
Détails
En vente sur demande
Thread-lock fluid... Aperçu rapide

Référence: 24/10

Thread-lock fluid medium-strength, 10 ml

Commentaire(s): 0

Use thread-lock fluid to prevent screws loosening themselves through vibrations.If you wish to use it on a screw please note the difference between types: medium-strength "blue" can be released again if the correct tool is used. High-strength "green" adheres so firmly that the joint can only be released by applying heat, and with plastic parts this could...

Prix 15,00 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook