Accueil

Filtrer par

Prix

Prix

  • 5,00 € - 131,00 €

Catégories

Catégories

Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes
Outillages/colles/lubrifiants

Outillages/colles/lubrifiants

Outillages/colles/lubrifiants

Il y a 29 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 1-12 de 29 article(s)

Filtres actifs

  • Catégories : Gabarits
  • Catégories : Mêches
Hole-cutter, 3 to 14 mm... Aperçu rapide

Référence: 11/43

Hole-cutter, 3 to 14 mm diameter, with handle

Commentaire(s): 0

The pointed tip and the extremely sharp, double-edged blade of this tool are particularly good for cutting holes in thin materials such as GRP and other plastics. The hole-cutter requires no centre-punching and no pilot-hole, and produces a neat hole of infinitely variable diameter within the range 3 to 14 mm. The handle doubles as protection and storage...

Prix 43,90 €
Détails
En vente sur demande
Tap M 5.0 HSS Aperçu rapide

Référence: 11/55

Tap M 5.0 HSS

Commentaire(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prix 19,90 €
Détails
En vente sur demande
Drill set 4-part Aperçu rapide

Référence: 11/69

Drill set 4-part

Commentaire(s): 0

Most hardware stores offer a very good range of tools like drills. However, when you need special sizes for our special helicopter application, it is very helpful to have a drill set handy which includes exactly the right diameters.  Typical applications: Drill 1.8 mm Ø for flange-head self-tapping screwsDrill 2.0 mm Ø for M 2.5 threadsDrill 2.5 mm...

Prix 19,90 €
Détails
En vente sur demande
Swashplate jig Aperçu rapide

Référence: 68/17

Swashplate jig

Commentaire(s): 0

Use this swashplate jig to adjust the pushrods of the X-Treme, X-PERIENCE, XLV and Robinson R22 mechanics.

Prix 19,40 €
Détails
En vente sur demande
Twist drill 1.5 mm Aperçu rapide

Référence: 11/70

Twist drill 1.5 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Swashplate jig Aperçu rapide

Référence: 68/4

Swashplate jig

Commentaire(s): 0

The pushrods from the swashplate to the rotor head must be set to identical lengths.Just slip the swashplate jig under the swashplate, and the swashplate will automatically be set parallel to the dome plate and at right-angles to the rotor shaft. You can now set up all your linkages with confidence.

Prix 19,40 €
Détails
En vente sur demande
Twist drill 2.0 mm Aperçu rapide

Référence: 11/71

Twist drill 2.0 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Flybar spirit level Aperçu rapide

Référence: 79/1

Flybar spirit level

Commentaire(s): 0

To adjust the pitch of the main rotor blades accurately it is essential to set the flybar exactly horizontal. This is done by simply hanging a spirit level from the flybar. But make sure that the helicopter is standing on a level surface before you start!

Prix 17,00 €
Détails
En vente sur demande
Twist drill 2.5 mm Aperçu rapide

Référence: 11/72

Twist drill 2.5 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook