Accueil

Filtrer par

Prix

Prix

  • 5,00 € - 55,00 €

Catégories

Catégories

Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes
Outillages/colles/lubrifiants

Outillages/colles/lubrifiants

Outillages/colles/lubrifiants

Il y a 26 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 1-12 de 26 article(s)

Filtres actifs

  • Catégories : Mêches
  • Catégories : Pinces
Circlip pliers Aperçu rapide

Référence: 11/27

Circlip pliers

Commentaire(s): 0

Installing and removing the circlip on the main rotor shaft, these circlip pliers do the job and will not damage the circlip. The prongs of the pliers fit exactly in the holes in the circlip and open it evenly, without over-stressing it, so that it can safely be re-used. If you use other tools such as screwdrivers etc. the circlip is easily damaged or...

Prix 36,50 €
Détails
En vente sur demande
Wire cutters for steel wire Aperçu rapide

Référence: 11/31

Wire cutters for steel wire

Commentaire(s): 0

The 2 mm pushrod from the tail rotor servo to the tail rotor bellcrank is made of hardened steel, as is the 2 mm tail rotor shaft. If you need to cut this material to length you need wire cutters which cut cleanly. These wire cutters are the ideal tool for cutting hardened steel wire. Wear protective goggles!

Prix 54,60 €
Détails
En vente sur demande
Hole-cutter, 3 to 14 mm... Aperçu rapide

Référence: 11/43

Hole-cutter, 3 to 14 mm diameter, with handle

Commentaire(s): 0

The pointed tip and the extremely sharp, double-edged blade of this tool are particularly good for cutting holes in thin materials such as GRP and other plastics. The hole-cutter requires no centre-punching and no pilot-hole, and produces a neat hole of infinitely variable diameter within the range 3 to 14 mm. The handle doubles as protection and storage...

Prix 43,90 €
Détails
En vente sur demande
Tap M 5.0 HSS Aperçu rapide

Référence: 11/55

Tap M 5.0 HSS

Commentaire(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prix 19,90 €
Détails
En vente sur demande
All-purpose pliers Aperçu rapide

Référence: 11/37

All-purpose pliers

Commentaire(s): 0

With these practical, small general purpose pliers you can reach almost all your mechanical parts. These pliers rest nicely in your hand because of the non-slip grips. Overall length 12 cm

Prix 12,80 €
Détails
En vente sur demande
Ball-link pliers Aperçu rapide

Référence: 11/99

Ball-link pliers

Commentaire(s): 0

When you are carrying out maintenance work on your mechanics or adjusting the mechanical linkages, e.g. to reset blade tracking, you have to push the ball-links off their pivot balls.These special ball-link pliers help you carry out this little task easily and without damaging the links. It is made of high-quality steel, and can be used both to disconnect...

Prix 54,60 €
Détails
En vente sur demande
Drill set 4-part Aperçu rapide

Référence: 11/69

Drill set 4-part

Commentaire(s): 0

Most hardware stores offer a very good range of tools like drills. However, when you need special sizes for our special helicopter application, it is very helpful to have a drill set handy which includes exactly the right diameters.  Typical applications: Drill 1.8 mm Ø for flange-head self-tapping screwsDrill 2.0 mm Ø for M 2.5 threadsDrill 2.5 mm...

Prix 19,90 €
Détails
En vente sur demande
Twist drill 1.5 mm Aperçu rapide

Référence: 11/70

Twist drill 1.5 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Twist drill 2.0 mm Aperçu rapide

Référence: 11/71

Twist drill 2.0 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Twist drill 2.5 mm Aperçu rapide

Référence: 11/72

Twist drill 2.5 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Twist drill 2.8 mm Aperçu rapide

Référence: 11/73

Twist drill 2.8 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook