Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Electric "Skyfox" mechanics

1002/15
Note 
Including metal internal tooth gear!
These are the electric Skyfox mechanics which are used with one of the following conversion sets for the required gear ratio.

Mechanics excludes motor, motor mount, and motor gears... see below.

Following the trend for electric models, Vario have produced an electric conversion set for the popular Skyfox mechanics. The set comprises of motor mount, gears, motor, and speed controller. There are three different sets available depending on the gear ratio required.

Part # 3312 for rotor diameter 1800mm, 2 blade
Part # 3313 for rotor diameter 1680mm, multi blade
Part # 3314 for rotor diameter 1500mm, 2 blade
539,50 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description
Including metal internal tooth gear!
These are the electric Skyfox mechanics which are used with one of the following conversion sets for the required gear ratio.

Mechanics excludes motor, motor mount, and motor gears... see below.

Following the trend for electric models, Vario have produced an electric conversion set for the popular Skyfox mechanics. The set comprises of motor mount, gears, motor, and speed controller. There are three different sets available depending on the gear ratio required.

Part # 3312 for rotor diameter 1800mm, 2 blade
Part # 3313 for rotor diameter 1680mm, multi blade
Part # 3314 for rotor diameter 1500mm, 2 blade
Détails du produit
1002/15
Documents joints
Téléchargement
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Electric "Skyfox" mechanics

Electric "Skyfox" mechanics

Including metal internal tooth gear!
These are the electric Skyfox mechanics which are used with one of the following conversion sets for the required gear ratio.

Mechanics excludes motor, motor mount, and motor gears... see below.

Following the trend for electric models, Vario have produced an electric conversion set for the popular Skyfox mechanics. The set comprises of motor mount, gears, motor, and speed controller. There are three different sets available depending on the gear ratio required.

Part # 3312 for rotor diameter 1800mm, 2 blade
Part # 3313 for rotor diameter 1680mm, multi blade
Part # 3314 for rotor diameter 1500mm, 2 blade
Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 305/24

Electric mechanics Lama 1.80 m

Commentaire(s): 0

- true-to-original mechanics especially for fuselage Ord.No. 3005- low noise level because of belt gear stage and spiral-toothed plate gear stage- true-to-original swashplate linkage

Prix 1 260,10 €
Détails
En vente sur demande

Référence: 121/22

EC 120 Electric Dome Mechanics

Commentaire(s): 0

Specially developed for the EC 120 are these Dome mechanics.Easy to assemble.No separate upper support mechanism necessary.Solid construction with angled side walls for maximum rigidity.Designed for mounting a Kontronik Pyro 800.

Prix 1 958,80 €
Détails
En vente sur demande

Référence: 1002/1200

Electric mechanics XL

Commentaire(s): 0

Brand new dome mechanics which is especially designed for the scale model electric flight and allows full cockpit detail. This mechanics is suitable for fuselage kit Ord.No. 1112. Electric motors are quiet, low in vibration, without exhaust gases and residual thrust. The blade slap noise of the rotor blades is more noticeable than with other types of...

Prix 1 723,90 €
Détails
En vente sur demande

Référence: 1002/78

Electric mechanics (turbine PHT3-3)

Commentaire(s): 0

These mechanics can be used in all fuselages that are designed for the JetCat PHT3-3 or Vario Turbine mechanics Ord.No. 1002/68.You will need to order the Motor pulley gear seperatley to achieve the required rotor rpm....Motor Pulley Ord.No.42 teeth, 850 rpm, 4-blade 2300 mm Ord.No. 500/4144 teeth, 885 rpm, 3-blade 2300 mm Ord.No. 500/4348 teeth, 960 rpm,...

Prix 1 922,30 €
Détails
En vente sur demande

Suivez-nous sur Facebook