Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Stabiliser set UH-1D

110/11
Note 

 

  • Stabiliser set, GRP
  • 2-part
  • for UH-1D with a length up to approx. 1 630 mm
94,20 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

 

  • Stabiliser set, GRP
  • 2-part
  • for UH-1D with a length up to approx. 1 630 mm
Détails du produit
110/11
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Stabiliser set UH-1D

Stabiliser set UH-1D

 

  • Stabiliser set, GRP
  • 2-part
  • for UH-1D with a length up to approx. 1 630 mm
Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 55/8

12 x 28 x 8 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 12 x 28 x 8 mmpack of...

Prix 14,80 €
Détails
En vente sur demande

Référence: 40

4 x 13 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 4 x 13 x 5 mmpack of...

Prix 11,70 €
Détails
En vente sur demande

Référence: 68/51

Swivel bearing 12 x 22 x 10 mm

Commentaire(s): 0

A swivel bearing is fitted with a ball which is capable of rotation in all directions; this application is used in the swashplate. The dimensions of a swivel bearing mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Swivel bearing 12 x 22 x 10 mmpack of 1

Prix 29,80 €
Détails
En vente sur demande

Référence: 71/11

Flanged ballrace 3 x 7 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 12,80 €
Détails
En vente sur demande

Référence: 94/3

Thrust bearing 4 x 10 x 3 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 4 x 10 x 3...

Prix 11,70 €
Détails
En vente sur demande

Référence: 11/66

Crankshaft nut socket spanner 10 mm

Commentaire(s): 0

If you want to tighten the crankshaft nut on your engine fully, and still be able to loosen it again without problems, you need the correct size of crankshaft socket spanner. Note, however, that different engines require different sizes, so take care to order the correct item. Crankshaft nut socket spanner 10 mm, for O.S.

Prix 23,90 €
Détails
En vente sur demande

Référence: 10/38

Penetrating oil

Commentaire(s): 0

When flying in moist air or rainy conditions you may find that rust starts to form on shafts. If this happens you could find that the swashplate is stuck fast the following day. A quick spray of penetrating oil will prevent oxidation getting a hold on the swashplate. Use it on the main rotor shaft and tail rotor shaft after flying; a few little squirts...

Prix 13,40 €
Détails
En vente sur demande

Référence: 4302

Bougie Enya 6

Commentaire(s): 0

Contenu du paquet 1 piècemoteur chaud - bougie froide (été) moteur froid - bougie chaude (hiver)

Prix 25,10 €
Détails
En vente sur demande

Référence: 10/73

Five minute epoxy, 50 ml

Commentaire(s): 0

The more you build, the more frequently you use epoxies, whose components must be proportionately mixed. When you insert cartridges into the dispenser and press the components through the mixing nozzle the epoxy is ready for immediate use. Pack of 50 ml, pot life approx. 5 minutes

Prix 18,60 €
Détails
En vente sur demande

Référence: 17/22

6 x 13 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 6 x 13 x 5 mmpack of...

Prix 9,70 €
Détails
En vente sur demande

Référence: 90/9

Assembly tray, 25-part

Commentaire(s): 0

Appropriate precautions should always be taken every time you start working on your model, and one of them is to prepare a suitable temporary storage area for small and ultra-small components. These assembly trays are sub-divided into small compartments, allowing you to sort components according to the stage of construction, while a second tray is used to...

Prix 18,40 €
Détails
En vente sur demande