Tappo della linea del carburante

Référence: 3720

Station de remplissage, contenu 3 l

This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.

Référence: 791/27

Réservoir intérieur pour Cobra 2,2 l

The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.

Référence: 26/4

Tank 400 ccm Benzin/Methanol

Référence: 834/26

Tank 540 ccm für Benzin

Référence: 10/66

Absperrhahn mit Feinsieb für Methanol

Référence: 830/83

Durite d'essence 1m

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Référence: 641/26

Réservoir Air-Crane, en GFK, version pour réacteur

Component part for fuselage Air-Crane, Ord.No. 6410

Référence: 3740

Station de carburant, kérosène 10 l

Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.

Référence: 412/26

Réservoir pour Kérosène 2 l pour Bell 412

dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)

Référence: 860/26

Tank 540 ccm für Methanol

Référence: 3741

support de Pompe a carburant

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.

Référence: 26/50

Réservoir en Kevlar 1.4 l pour Kérosène et pétrole

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...

Référence: 26/34

Collier essence - kérosène

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Référence: 26/20

Pendelsieb für Methanol

Référence: 26/25

Filtre pour prise d'air du réservoir

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Référence: 302/26

Réservoir pour Kérosène 1,5 l

Fuel tank for Kerosin 1,5 l