Collet 2 mm

Riferimento: 7/36

Main shaft sleeve

 Content of the package1 piece

Riferimento: 307/53

Dome fittings set Lama T-Rex 700E

Swashplate / driver / mast lock / plus rods needed for fitting the 3 blade rotor head on the Lama with T-Rex 700E mechanics

Riferimento: 42/18

Bevel gear 6 mm, 19-tooth

 Bevel gear6 mm Ømodule 0.719-tooth

Riferimento: 54/9

Clamp ring 10 mm diameter rotor shaft

Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted. The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.Clamp ring for rotor shaft, 10 mm diameter

Riferimento: 722/15

Lay shaft 10 x 252 mm

 Lay shaft10 diameter x 252 mm

Riferimento: 830/51

Brackets for petrol mechanics

Fuselage mounting brackets for petrol mechanics, pack of 2,recommended accessories for the installation of a petrol trainer mechanics in a fuselage.

Riferimento: 94/4

Bush 6 x 7 x 17,5 mm

 Bush 6 x 7 x 17.5 mmpack of 1

Riferimento: 500/361

Freewheel counter-clockwise

Not available

Riferimento: 607/53

Set plato ciclico BO 105 T-Rex

Riferimento: 834/51

CFK Side frame for Benzin Acrobatic

Not available

Riferimento: 107/12

Balls chrome-plated 2.0 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces

Riferimento: 164

Collet 4 mm

Pack of 2 incl. screws

Riferimento: 36/4

Freewheel washer 5.9 x 11.9 mm

The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....

Riferimento: 260/36

Freewheel for 12 mm shaft

Not available

Riferimento: 36/25

Freewheel / driven tail rotor

A driven tail rotor enables the model to fly backwards, and provides better turning ability during an auto-rotation landing.The parts in this conversion set are used to re-locate the freewheel in the hub of the main drive gear, away from the main rotor shaft. The main rotor now drives the complete main gearbox and therefore also the tail rotor during an...

Riferimento: 830/15

Lay shaft 8 x 191 mm

 Lay shaft8 diameter x 191 mm