Distanzhülsen X-Treme Mechanik linksdrehend

Référence: 67/47

Mutter 5/16" 24 UNF, WE P5 + 4Takt

Référence: 870/44

Distanzhülsen X-Treme Mechanik

Référence: 116/2

Collier à ressort

 Spring clippack of 2for mounting PTFE pipes 115/11

Référence: 116/17

Kit raccordement flexible

  Content of the package complete as shown

Référence: 16/2

Peinture résonateur, noir

Silencers and tuned pipes become discoloured and un-sightly during the course of their hard life, but they can be revived with this special heat-resistant paint.The silencer paint also is designed to improve heat dissipation. Heat resistant up to 500° C.150 ml spray can

Référence: 64/66

Luftschrauben-Set

Référence: 870/36

Roue libre X-Treme, 10 mm

 Content of the package1 piece

Référence: 809/28

Support de prise de bougie

with opening for fuel tank nipple

Référence: 871/45

Kit entretoises X-Treme

 Content of the package1 x 4,0 mm4 x 16,8 mm4 x 30,2 mm4 x 31,2 mm

Référence: 870/54

Support rouleaux de guidage X-Treme

Belt tension roller bearer. Content of the package: 1 piece.

Référence: 115/14

Flexible 12 x 240 mm

 Content of the package1 piece

Référence: 1020/20

Écrou de vilebrequin 1/4" 28 UNF

 Content of the package1 piece

Référence: 244505

Zylinderkopfdichtung R50 8,5ccOrd.No. 244505

Référence: 67/41

Adaptateur de démarrage 5/16"

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 5/16" -24 UNF crankshaft threade.g. at Webra P5 and 4-stroke engines

Référence: 115/5

Tube PTFE 20 x 2,5 x 120 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Référence: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm