 
	        
     
	        
    Keine Marke
 
	         
           
                                     
            
                          Política de seguridad
 
                                     
            
                          Política de envío
 
                                     
            
                          Política de devolución
Aktuell keine Kunden-Kommentare
Reference: 832/68
The use of a mechanics with 12 mm Ø main shaft requires a swashplate with an appropriate swivel ballrace.
Reference: 68/53
Swashplate driver, metal4 ballracesinner diameter of the center part: 24 mm
Reference: 68/100
Swashplate set for conversion from 10 mm to 12 mm
Reference: 68/60
Swashplate driver for 6-blade rotor head, metal4 ballracesweigth approx. 35 gsuitable for 12 mm Ø main shafts
Reference: 68/52
Swashplate driver, especially for a 5-blade rotor head. "for 12 mm main rotor shaft"
Reference: 52/10
For Schweizer 300 (Ord.No. 6031), Hughes 500 (Ord.No. 9005) and Agusta (Ord.No. 9020). Height of the slot 47.0 mm for use with the rotor shaft 35/39.
Reference: 68/14
This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.
Reference: 68/50
Swashplate driver, metal4 ballracesweigth approx. 25.8 gsuitable for 12 mm Ø main shafts
Reference: 68/20
Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.
Reference: 101/49
Spacer for four-bladed control bridge Ord.No. 101/48
Reference: 268/55
Swashplate driver for 15 mm Ø rotor shaft.
