Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Swashplate guide

52/20
Note 



The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws.

The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to cater for smaller swashplates. Height of slot 55.7 mm

14,70 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws.

The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to cater for smaller swashplates. Height of slot 55.7 mm

Détails du produit
52/20
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Swashplate guide

Swashplate guide



The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws.

The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to cater for smaller swashplates. Height of slot 55.7 mm

Donnez votre avis
16 other products in the same category:

Reference: 68/54

Swashplate 5-blade, 12 mm

Review(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point.

Price 160.70€
More
On sale upon request

Reference: 68/56

6-blade / 7-blade swashplate for 12 mm rotor shaft

Review(s): 0

Six-blade rotor heads also call for new thinking in swashplate technology.This swashplate is designed to provide more space between the pushrods and the swashplate driver compared to rotor heads with a smaller number of blades.

Price 193.20€
More
On sale upon request

Reference: 68/14

3-D swashplate 10 mm

Review(s): 0

This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.

Price 108.30€
More
On sale upon request

Reference: 68/15

Swashplate 5-blade

Review(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with...

Price 131.70€
More
On sale upon request

Reference: 68/20-5

Swashplate driver for rotor head 705/30

Review(s): 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Price 87.20€
More
On sale upon request

Suivez-nous sur Facebook