Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 12,80 €
Détails
En vente sur demande
Toutes les meilleures ventes

Swashplate driver for rotor head 705/30

68/20-5
Note 

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.
This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.
Aluminium swashplate driver with 4 ballraces.

75,80 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.
This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.
Aluminium swashplate driver with 4 ballraces.

Détails du produit
68/20-5
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Swashplate driver for rotor head 705/30

Swashplate driver for rotor head 705/30

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.
This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.
Aluminium swashplate driver with 4 ballraces.

Donnez votre avis
16 other products in the same category:

Reference: 68/15

Swashplate 5-blade

Review(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with...

Price 114.50€
More
On sale upon request

Reference: 68/14

3-D swashplate 10 mm

Review(s): 0

This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.

Price 94.20€
More
On sale upon request

Reference: 52/10

Swashplate guide black

Review(s): 0

For Schweizer 300 (Ord.No. 6031), Hughes 500 (Ord.No. 9005) and Agusta (Ord.No. 9020). Height of the slot 47.0 mm for use with the rotor shaft 35/39.

Price 12.80€
More
On sale upon request

Reference: 68/54

Swashplate 5-blade, 12 mm

Review(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point.

Price 139.70€
More
On sale upon request

Reference: 68/31

Swashplate 10 mm

Review(s): 0

All swashplates (made of aluminium) are fitted with high-quality bearings and are designed for use with 2-blade, 3-blade and 4-blade rotor heads, while the outer swash-plate ring is designed for 3- and 4-point linkages.The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the...

Price 94.20€
More
On sale upon request

Reference: 52/20

Swashplate guide

Review(s): 0

The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws. The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to...

Price 12.80€
More
On sale upon request

Suivez-nous sur Facebook