
Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Placa para guía cítara
Política de seguridad
Política de envío
Política de devolución
Placa para guía cítara
No hay reseñas de clientes en este momento.
Reference: 36/4
The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....
Reference: 107/13
Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces
Reference: 36/25
A driven tail rotor enables the model to fly backwards, and provides better turning ability during an auto-rotation landing.The parts in this conversion set are used to re-locate the freewheel in the hub of the main drive gear, away from the main rotor shaft. The main rotor now drives the complete main gearbox and therefore also the tail rotor during an...
Reference: 53/19
Dome fittings set for JetCat PHT3-L turbine
Reference: 830/53
Bottom structure for petrol mechanics
Reference: 908/68
Component part for mechanics Ord.No. 1002/27
Reference: 107/43
Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.
Placa para guía cítara