Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Référence: 116/5
Content of the packag: 1 piececomplete as shown
Référence: 13/32
The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.
Référence: 3720
This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.
Référence: 3740
Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.
Référence: 412/26
dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)
Référence: 206/26
Kerosene Tank 2.2 l, GRP, with accessories, for UH-1D with Turbine
Référence: 26/70
Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all tested with air pressure on leaks to make sure that they are 100% leak-proof, when they arrive at your workshop. They fit in the Vario turbine Ecureuil fuselage, that we recommend the plastic tank Ord.No. 26/7 for.When...
